powered by CADENAS

Manual

Manual

2.3.5.  NX Integration - Administration

2.3.5.1. Block [CreationOptions(is3d)]
2.3.5.1.1. Key "Poolpath"
2.3.5.1.2. Key "FileName"
2.3.5.1.3. Key "EnableMCD" - Mechatronic Concept Designer
2.3.5.1.4. Key "material"
2.3.5.1.5. Keys "feature_group_xx"
2.3.5.1.6. Keys "layer_xx" - Layer descriptions
2.3.5.1.7. Keys "LOD_REFSET_x"
2.3.5.1.8. Key "PhysicalPropertiesMode"
2.3.5.1.9. Key "NxOption_01"
2.3.5.1.10. Key "UsePartExpressions"
2.3.5.1.11. Key "PipingConnPoint" - NX routing function
2.3.5.1.11.1. More NX Routing options
2.3.5.2. Block [INTERFACE]
2.3.5.2.1. Key "STEPExportVisibleLayersOnly"
2.3.5.2.2. Key "ForceCreateNew3DPreviews"
2.3.5.3. Block [UI] - Adjust menus and toolbars
2.3.5.3.1. Application-sensitive PSOL Ribbons
2.3.5.3.1.1. Key "PrepareMenu" - NX9 / Ribbon menu by default
2.3.5.4. Application-sensitive PSOL Ribbons
2.3.5.5. Block [AttributeMapping(is3d)]
2.3.5.5.1. Key "Attr_CopyFrom_01"
2.3.5.6. Block [CadDocumentAttributes]
2.3.5.6.1. Add categories to attribute mapping
2.3.5.7. Block [NativeCheckin]
2.3.5.7.1. IgnoreCheckinAttributes01
2.3.5.8. NoSection
2.3.5.9. NX: Unicode support in filenames
2.3.5.10. Create "Alternative Representations"
2.3.5.11. NX: "Position Override" functionality
2.3.5.12. NX: Macro independent placement dialog
2.3.5.12.1. Create NX Macro for native placing strategy
2.3.5.12.2. NX Macro "cns_place_teamcenter_partrev.macro"
2.3.5.13. Troubleshooting
2.3.5.13.1. Installation - Deinstallation
2.3.5.14. User documentation
2.3.5.15. siemenspsol.cfg
2.3.5.15.1. Reuse Library - CADENAS Library - Setting options

In the configuration file ifugnx.cfg you can find all settings for the NX integration.

The most important information is found in the single blocks and keys, in the configuration file itself.

In the following you can find more comprehensive information on some blocks and keys.

Syntax and essential concepts are found under Section 2.2, “CAD encompassing information ”.

[Note] Note

Changes at configuration files should only be performed by experienced users or CADENAS Consultants.