powered by CADENAS

Terms of Service

Database operator

 

 

CADENAS Konstruktions-,

Softwareentwicklungs-

und Vertriebs GmbH

Schernecker Str. 5

86167 Augsburg

Germany

 

Phone: +49 821 2 58 58 0-0

Fax: +49 (0) 821 2 58 58 0-999

info@cadenas.de

www.cadenas.de

 

 

 

Terms of Service for CAD download and community

 

By registering I explicitly accept the following rules of conduct of the community as well as the terms of use for the CAD download.

 

A. Terms of Service Community

 

The following terms of service apply to your use of the PARTcommunity network.

You are solely responsible for your conduct and your content on the PARTcommunity network and compliance with these terms.

By registering with us or using or browsing the PARTcommunity network, acknowledge that you have read, understood, and agreed to be bound by these terms. A minimum age of 16 years applies for the usage and browsing.

For using the download area (downloading data), the terms and conditions for download are applied in addition to the present conditions.

The PARTcommunity network works in real-time, which means that the providers of the PARTcommunity network do not immediately have control over posts that are submitted. Please note that we cannot monitor posts of our visitors online. We do not take any responsibility for the content, accuracy and form of individually submitted posts. Every author of posts is solely responsible for his post.

 

We hereby explicitly forbid:

a) Posts that infringe, violate or misappropriate any third party's intellectual property rights or other proprietary rights or contractual rights;

b) Posts that are misleading, deceptive or fraudulent or otherwise unlawful or promote unlawful behavior, including engaging in phishing or otherwise obtaining financial data or other personal information in a misleading manner or for fraudulent or misleading purposes;

c) Posts that contain software viruses or any other computer code, files or programs designed to interrupt, destroy or limit the functionality of any computer software or hardware or telecommunications equipment;

d) Posts and links (to sites, images, etc.) with illegal, pornographic, racist or violent content as well as corresponding formulations serving the same purpose or concealed contents with the same orientation.

 

e) Posts and links(to sites, images, etc.) with content that is inhuman or is in any other way violating the human dignity, as well as corresponding formulations serving the same purpose or concealed contents with the same orientation.

f) Posts and links(to sites, images, etc.) with content threatening life and limb, property and existence,  as well as corresponding formulations serving the same purpose or concealed contents with the same orientation.

g) Posts and links(to sites, images, etc.) with advertisement of any kind, serving just that purpose;

h) Posts and links(to sites, images, etc.) which are obviously job offers/applications;

i) Posts and links(to sites, images, etc.) which obviously only serve the purpose of buying/selling/trading goods;

j) Posts that may be regarded as spam. We consider spam sending several similar or senseless messages at short intervals or several crosspostings.

k) Using misleading email or IP addresses, or forged headers or otherwise manipulated identifiers in order to disguise the origin of content transmitted through this network or to users;

l) "Stalk" or otherwise harass anyone;

m) Collect, use or disclose data, including personal information, about other users without their consent or for unlawful purposes or in violation of applicable law or regulations;

n) Request, solicit or otherwise obtain access to usernames, passwords or other authentication credentials from any member of this network or to proxy authentication credentials for any member of this Network for the purposes of automating logins to this Network;

o) Use automated means, including spiders, robots, crawlers, data mining tools, or the like to download data from this Network - except for Internet search engines (e.g. Google) and non-commercial public archives (e.g. archive.org) that comply with our robots.txt file, or respected web services/RSS/Atom clients. We reserve the right to define what we mean by respectable;

You agree not to authorize or encourage any third party to use the PARTcommunity network to facilitate any of the foregoing prohibited conduct.

Should the administrator/moderator notice any content of the above mentioned kind, it will be removed from the system without prior notification to the author.

The provider reserves the right to temporarily or completely revoke a user’s/visitor’s posting privilege.

We kindly ask all visitors or members of the PARTcommunity Network for a fair discussion and appropriate choice of words.

Please use a language you would appreciate in the answers to your posts, as well.

When submitting a post, the author grants a general right to use the content of his post.

The provider is devoid of any liability and claims for damages.

All legal relations arising from this contract are subject to the laws of the Federal Republic of Germany. Court of Augsburg (Germany).

 

 

B. Terms of Use for the portal

Terms of use for preview images, downloaded data and files, disclaimer between the "database operator" and the customer

 

1. Subject Matter of Contract

Within the scope of our fair use policy (50 download tickets per day), using the database and downloading CAD/BIM files is free of charge for the customer.

The database solely is to be used by customers who are companies according to business conditions. These are normal or lawful persons or legal business partnerships, which operate in commercial or self-employed activities. A minimum age of 16 years applies for the usage and browsing.

The database provider supplies the customer with online access to this database and the therein contained data per http via internet for research and to retrieve data within the frame of this contract.

The use of this database occurs solely based on the existing terms of this contract. Other terms and conditions are invalid even if the database provider does not exclusively object to these. Addendums and changes to the contract are only valid if in writing.

The purpose of this data is limited to the use of this data for CAD designs and BIM designs. Any use of this data with the goal of replacing or copying parts of or the entire database is strictly prohibited.

 

2. Use of Customer Data, Non-Disclosure and Data Protection

The database provider records the usage and billing data and saves these respectively during the legally admissible time. Upon request, the customer has the right to be informed concerning his saved data free of charge. The customer is hereto informed that the database provider saves and mechanically records the customer’s address and other specific details in machine-readable form and according to the guidelines of the Federal Data Protection Act. The database operator is expressly authorized to pass on the customer's usage data to the respective manufacturer of the third-party data retrieved by the customer and to transmit the usage data to third parties for the purpose of contacting them via e-mail and telephone, advertising, product presentation or for technical consultations and advice. The transfer of customer data is only permitted for commercial use and upon acceptance of the General Terms and Conditions.

For further information, please refer to our privacy policy

https://www.cadenas.de/unternehmen/datenschutz

 

3. Guarantee

The database provider does not assume liability for the access options on the database and the availability of the saved data, the database provider has put the data together with the utmost care. The database provider does not assume liability for the guarantee of correct, complete, up-to-date and usable data recalled by the customer. The identity of the dimensions of parts in the database to the purchased parts is not guaranteed. No guarantees necessarily account for particularly insignificant impairments during research, data recall or concerning the content of the data (e.g. typos), which do not significantly impair the database. Excluded from the warranty are problems that arise from defects or interruptions in the customer’s computer, communication channels, or from improper use by the customer.

 

4. Liability

The granting of free use of the database occurs in good faith and at the customer’s own risk. The database provider assumes responsibility and liability in the event of gross negligence or breach of an essential requirement for the completion of the contract. Any liability for consequential damages arising from the use of third data cannot be assumed. Warranty and liability are excluded for the remainder of the contract.

 

5. Terms of Use

All rights, in particular the copyright use and analysis right of the database as well as those to the essential parts of the database in regards to the customer are exclusively reserved for the database provider. The customer has the right to conduct searches in the database and save a selection of the researched data onto the memory of his computer hard drive. The customer may print out the retrieved data as a hard copy or save it onto the hard drive of his computer. The customer may use the retrieved data for personal uses only.

 

The following uses of data recalled in electronic form by the customer are strictly prohibited:

a)    The use of the retrieved data to produce more than just individual copies or for making systematic collections or compiling a new database, especially the systematic collection in computer systems, the systematic collection of data in PDM;PLM; BIM systems, or systems with the same objective target. The storage of data in a PLM system, which is technically necessary in the typical design process, is expressly permitted.

b)    The production of additional copies of the downloaded data for personal scientific use, if carried out for commercial purposes and the inclusion of additional copies in personal files, even if this is for the customer’s own information and concerns daily demands.

c)     The retrieved data may be passed on to business partners and companies (such as workshops) for consideration and implementation of concrete projects, or passed on to the client as an integral part of contract designs. The customer will ensure that the business partners of the company do not to use the data for other purposes. Otherwise, the retrieved data may not be ceded to third parties, distributed, or communicated to the public.

d)    The translation, adaptation, arrangement and other alteration of the retrieved data (outside the constructively necessary)  requires the consent of the database provider. The compilations of summaries (abstracts), which replace the notice of the original data, are prohibited.

e)    The distribution of this data to the direct or indirect competitor of the database provider.

 

The customer may not remove any copyright, trademark and other reservations of rights in the data.

A violation of these Terms of Use or attempt to circumvent the barriers to entry, constitute a copyright violation and entitle the database operator to collect damages.

Insofar as retrieved data is issued under a Creative Commons license, the permitted scope of use of this data is specified and limited solely by the respectively attached Creative Commons license.

 

6. Special Provisions for Information Brokers

Information brokers (equals customer in this contract) that run the database research for clients, may pass on the research results mentioned under paragraph 5 to the respective client, if said client has agreed, in written form, to abide by the terms of use of the customer addressed by the database provider according to paragraph 5, and the customer offers the database provider a formal obligation agreed to by the client upon request.

 

7. Technical Specifications

The customer is responsible for supplying the connection to the database provider’s servers and for all other technical outfits.

The database provider has the right, if necessary also during working hours, to conduct maintenance on the server and database. This may result in disturbances concerning data recall for which the database provider assumes no liability.

 

8. Customer Obligations

The customer ensures that unauthorized third parties do not gain access to copies made by him or gain unauthorized access to the contents of the database. The database provider reserves the right to investigate suspected abuse or breach of contract, take appropriate actions, and upon justified suspicion, reserves the right to freeze the customer’s access to the database.

The customer may only use the database appropriately. In particular the customer should: use the database appropriately especially concerning the terms of use (paragraph 5); be responsible for protecting the basics of data privacy; abide by official and technical regulations, as well as netiquette (internet-specific system of rules); immediately announce indications of misuse of the database to the database provider.

The customer is obligated to inform the database provider about noticeable damages or defects of the database.

I hereby declare myself to complete the Database Order Contract. In particular, I hereby authorize consent to share the use of data in the context of paragraph 2 of this contract. I hereby also certify that I own a valid CAD software license and confirm to use the data solely for the above described purpose(s).

 

 

C. Terms Of Use PARTcloud 3D Printing & Sharing Service

1. User Content

User Content means any and all information and content that a user submits to, or uses with, the Site or Services (e.g., content in the user's profile or postings). You are solely responsible for your User Content. You assume all risks associated with use of your User Content, including any reliance on its accuracy, completeness or usefulness by others, or any disclosure of your User Content that makes you or any third party personally identifiable. You hereby represent and warrant that your User Content does not violate the Acceptable Use Policy (defined below). You may not state or imply that your User Content is in any way provided, sponsored or endorsed by Company. Because you alone are responsible for your User Content (and not Company), you may expose yourself to liability if, for example, your User Content violates the Acceptable Use Policy. Company is not obligated to backup any User Content and User Content may be deleted at anytime. You are solely responsible for creating backup copies of your User Content if you desire.

 

2. License.

You hereby grant, and you represent and warrant that you have the right to grant, to Company and its affiliates and partners, an irrevocable, nonexclusive, royalty-free and fully paid, worldwide license to reproduce, distribute, publicly display and perform, prepare derivative works of, incorporate into other works, and otherwise use your User Content, and to grant sublicenses of the foregoing, solely for the purposes of including your User Content in the Site and Services. You agree to irrevocably waive (and cause to be waived) any claims and assertions of moral rights or attribution with respect to your User Content.

 

3. Acceptable Use Policy.

The following sets forth Company's "Acceptable Use Policy":

(a) You agree not to use the Site or Services to collect, upload, transmit, display, or distribute any User Content (i) that violates any third-party right, including any copyright, trademark, patent, trade secret, moral right, privacy right, right of publicity, or any other intellectual property or proprietary right; (ii) that is unlawful, harassing, abusive, tortious, threatening, harmful, invasive of another's privacy, vulgar, defamatory, false, intentionally misleading, trade libelous, pornographic, sexually explicit, obscene, patently offensive, promotes racism, bigotry, hatred, or physical harm of any kind against any group or individual, promotes illegal activities or contributes to the creation of weapons, illegal materials or is otherwise objectionable; (iii) that is harmful to minors in any way; or (iv) that is in violation of any law, regulation, or obligations or restrictions imposed by any third party.

(b) In addition, you agree not to use the Site or Services to: (i) upload, transmit, or distribute any computer viruses, worms, or any software intended to damage or alter a computer system or data; (ii) send unsolicited or unauthorized advertising, promotional materials, junk mail, spam, chain letters, pyramid schemes, or any other form of duplicative or unsolicited messages, whether commercial or otherwise; (iii) harvest, collect, gather or assemble information or data regarding other users, including e-mail addresses, without their consent; (iv) interfere with, disrupt, or create an undue burden on servers or networks connected to the Site or Services or violate the regulations, policies or procedures of such networks; (v) attempt to gain unauthorized access to the Site or Services, other computer systems or networks connected to or used together with the Site or Services, through password mining or other means; (vi) harass or interfere with another user's use and enjoyment of the Site or Services; (vi) introduce software or automated agents or scripts to the Site or Services so as to produce multiple accounts, generate automated searches, requests and queries, or to strip, scrape, or mine data from the Site or Services (except that we grant the operators of public search engines revocable permission to use spiders to copy materials from the Site or Services for the sole purpose of and solely to the extent necessary for creating publicly available searchable indices of the materials, but not caches or archives of such materials); or (vii) systematically aggregating, embedding or deep-linking content from your own web site, service or platform to the Site for commercial purposes without the prior written consent of Company.

 

4. Enforcement.

We reserve the right (but have no obligation) to review any User Content, investigate, and/or take appropriate action against you in our sole discretion if you violate the Acceptable Use Policy or any other provision of these Terms of Use or otherwise create liability for us or any other person. Such acts may include removing or modifying your User Content, terminating your Company Account and/or reporting you to law enforcement authorities.

 

5. Feedback.

If you provide Company any feedback or suggestions regarding the Site or Services ("Feedback"), you hereby assign to Company all rights in the Feedback and agree that Company shall have the right to use such Feedback and related information in any manner it deems appropriate. Company will treat any Feedback you provide to Company as non-confidential and non-proprietary. You agree that you will not submit to Company any information or ideas that you consider to be confidential or proprietary.

 

6. Secondary License for PARTcloud Designs

When you upload certain User Content to the Site or Services, you will be asked to select a secondary copyright license, which is additional to the license you grant to Company and its affiliates and partners in Section 1.2. This license will govern how other Site or Services users may use your User Content. You can designate this license to be one of the Creative Commons Licenses (see http://www.creativecommons.org) listed in the pull-down menu on the Site. You agree that Company may make your User Content available to other Site or Services users, subject to such other Site or Services users abiding by the terms of this secondary license; however, if you select the "All Rights Reserved" secondary copyright license, you agree that it means Company may display your User Content for public viewing on the Site and other Site or Services users must contact you to obtain additional rights, as necessary. While Company will advise other Site or Services users of the secondary license you select and request that the terms of such license be observed, you acknowledge that it is not Company's responsibility to enforce this secondary license and Company cannot guarantee that your secondary license will in fact be observed by other Site or Services users.

 

D. Jurisdiction and Applicable Law

All legal relations arising from this contract are subject to the laws of the Federal Republic of Germany. Court of Augsburg (Germany).

I hereby agree to the conclusion of the database retrieval contract. In particular, I hereby give my consent to the transfer of the usage data within the scope of item 2 of this contract. I also hereby confirm that I am in possession of a valid CAD software license and I confirm that I will use the data exclusively for the purpose described herein.