powered by CADENAS

Manual

Manual

7.9.3.2. Point

Insert point :

The completely positioned point is identified in the sketch by a square frame.

Insert connection point :

The completely positioned connection point is indicated in the sketch by a green triangle .

More details can be found under:

Pattern origin :

The finally positioned pattern origin is now identified by a yellow circle in the sketch. See Section 7.9.3.2.2, “ Create pattern ”.

Reference point for rotated pattern :

The finally positioned reference point is now identified by a yellow square in the sketch. See Section 7.9.3.2.2, “ Create pattern ”.

[Note] Note

Confirm inputs in the Change parameter window with OK.