English
Deutsch
Español
Français
Hrvatski
Italiano
Polski
Türkçe
Русский
中文
日本語
한국어
Legal notice
powered by CADENAS

Manual

Top Links

Manual

2.3. CAD specific information
2.3.7.  Creo / PRO-Engineer Integration - Administration
Prev   Next

2.3.7.  Creo / PRO-Engineer Integration - Administration

2.3.7.1. Block [CreationOptions(is3d)]
2.3.7.1.1. Key "CreateDimensions"
2.3.7.1.2. Automatic accuracy search
2.3.7.1.3. Key "PoolPath"
2.3.7.1.4. Key "FileName"
2.3.7.1.5. Key "Material"
2.3.7.1.6. TempAxisLayer
2.3.7.2. Attribute mapping in Creo / ProEngineer
2.3.7.2.1. Block [AttributeMapping(is3d)]
2.3.7.2.2. Block [CadDocumentAttributes] - Transfer custom attributes
2.3.7.2.2.1. User defined attributes with type declaration
2.3.7.2.2.2. Adding new keys
2.3.7.3. Block [MatMAP] - Material mapping in Creo/ProEngineer
2.3.7.4. Block [UI] - Adjust menus and toolbars
2.3.7.5. Activating the PARTsolutions interface in Creo Parametric | Creo Elements/Pro 5.0
2.3.7.6. Conversions from Creo to "STEP" format
2.3.7.7. User documentation

In the configuration file ifproewildfire.cfg you can find all setting options for the Creo or Pro/Engineer integration.

Part from PARTdataManager with "Insert model"

Part from PARTdataManager with "Insert model"

[Note] Note

Common configuration information for Pro/E and Creo plugins

  • Pro/E and Creo cannot work with UNC paths.

    This is a security issue in all installations.

    This issue cannot be corrected by PARTsolutions.

    Mount a network share for the CADENAS installation and the pool directory.

  • Configuration of the following interface options 

    [CreationOptions]
PoolPath
TemplateName
ThreadUDFFile
DraftUDFFile
sweepAddUdfFile
sweepSubUdfFile
MassUdfFile
MassUdfPDM

[INTERFACE]
SeamlessURL
insertsymmacro
insertsecmacro
insertsketchmacro
NativeCheckoutPool
MetafileName

  • Common information on attribute mapping

    Custom attributes supported by this CAD are: (you may combine attributes separated by comma)

    • DESIGNATED -> designated attribute for PDM

    • READONLY -> attribute is readonly

    • BOOLEAN -> boolean value

    • INTEGER ->Integer

    • DOUBLE -> Decimal digit

    • STRING -> string value

The most important information is found in the single blocks and keys and the configuration file itself.

In the following you can find more comprehensive information on some blocks and keys.

Syntax und essential concepts are found under Section 2.2, “CAD encompassing information ”.

[Note] Note

Changes at configuration files should only be performed by experienced users or CADENAS Consultants.

Prev  Up  Next
2.3.6.15.1. Reuse Library - CADENAS Library - Setting options  Home  2.3.7.1. Block [CreationOptions(is3d)]