Manual
Login
Our 3D CAD supplier models have been moved to 3Dfindit.com, the new visual search engine for 3D CAD, CAE & BIM models.
You can log in there with your existing account of this site.
The content remains free of charge.
Top Links
Manual
 |
- 3.2.6.1.1. Creating vertical and horizontal center line
- 3.2.6.1.2. Determine height of hexagon
- 3.2.6.1.3. Define total height
- 3.2.6.1.4. Define diameter of a spherical head
- 3.2.6.1.5. Define horizontal position of spherical head
- 3.2.6.1.6. Describe the spherical head with a semicircle
- 3.2.6.1.7. Trim the sketch, Part 1
- 3.2.6.1.8. Create external chamfers on the hexagon
- 3.2.6.1.9. Trim the Sketch, Part 2
- 3.2.6.1.10. Set rotational axis
- 3.2.6.1.11. Close Sketch 1
- 3.2.6.1.12. Base rotate
Start with the creation of the "raw" cap nut.
In the following steps, the 2D sketch of the cap nut is to be made into the following form:
![[Note]](/community/externals/manuals/%24%7Bb2b:MANUALPATH/images/note.png)
