V9 the interfaces were largely standardized.
the following systems are provided:
Elements/ Direct Modeling
system contains the interface within the CAD:
The chapter at
hand is divided into the following sections:
Section 2.2, “Integrating the PARTsolutions
Section 2.3, “Function check of the PARTsolutions
Section 2.4, “Opening the
Section 2.5, “CAD specific
section, all CAD systems that are available for the current interfaces,
are listed in alphabetical order with their respective commands/menu
Classification is as follows:
The PARTsolutions menu of the
respective interface is graphically illustrated and the
individual menu items are links (see example at
By clicking on a link you
reach the respective section under Section 2.5, “CAD specific
Back to initial point
with Alt +
receive information specific to CAD.
For example, regarding placement
dialogs or interface activation.
Section 2.6, “
CAD encompassing reference of all menu commands”
contains all menu commands comprehensive within CAD.
wording of the chapter headings of the individual commands may result in
small differences. Some CAD systems use a short text due to character