powered by CADENAS

Manual

Manual

2.3.1.2.1.2. Example

Initial situation

Thick Lines shall be created on the layer AM_0 in red.

"2D view" dialog box: Thick lines are activated by default.

"2D view" dialog box: Thick lines are activated by default.

Under Layer Configuration, in the block Thick Solid Lines, the value in the key AcadLayerLineColor_00 is set on the value 1 (=Red).[48]

;----- Layer Configuration -----
;Thick Solid Lines
AcadLayerName_00=AM_0
AcadLayerLineType_00=Continuous
AcadLayerLineColor_00=1
AcadLayerLineWeight_00=50
AcadLayerVisibility_00=1
  • 1. Case

    The Layer AM_0 is not available in AutoCAD.

    Mechanical-Layer-Manager: In AutoCAD, only Layer 0 is available.

    Mechanical-Layer-Manager: In AutoCAD, only Layer 0 is available.

    Result

    The layer "AM_0" is created in AutoCAD with the defaults from the configuration file.

    The thick lines are depicted in red color in AutoCAD.

  • 2. Case

    Der Layer AM_0 is available in AutoCAD and is set on white.

    Mechanical Layer Manager: AM_0 = white

    Mechanical Layer Manager: AM_0 = white

    The inserted part is depicted with white "Thick line", because AutoCAD has priority.



  • [48] 1 = Red

  • 2 = Yellow

  • 3 = Green

  • 4 = Cyan

  • 5 = Blue

  • 6 = Magenta

  • 7 = White