Manual

Login

Manual

2.3.1.2.1. "Layer" configuration 2.3.1.2.1.1. Structure on a single "Layer" block
Prev	Next

2.3.1.2.1.1. Structure on a single "Layer" block

All blocks are build in the same way:

Example:

;Thick Solid Lines
AcadLayerName_00=AM_0
AcadLayerLineType_00=Continuous
AcadLayerLineColor_00=7
AcadLayerLineWeight_00=50
AcadLayerVisibility_00=1

In the following the schema is explained:

Layer name

AcadLayerName_<number> = Layer name
Line type

AcadLayerLineType_<number> = Continuous | Dashed | Dash-dot
Line color

AcadLayerLineColor_<number> = 1/2/3/4/5/6/7
- 1 = Red
- 2 = Yellow
- 3 = Green
- 4 = Cyan
- 5 = Blue
- 6 = Magenta
- 7 = White
Line weight

AcadLayerLineWeight_<number> = Value
Layer visibility

AcadLayerVisibility_<number> = 0/1

0: invisible

1: visible

Note

	Note
The numerical values <number> at the single keys doesn't matter. When creating additional blocks, increment the numerical values. The single keys of a block have to have the same numerical value. If you have created additional layers in AutoCAD, you can enhance the configuration file`ifacad.cfg` anytime.

The numerical values <number> at the single keys doesn't matter. When creating additional blocks, increment the numerical values. The single keys of a block have to have the same numerical value.

If you have created additional layers in AutoCAD, you can enhance the configuration fileifacad.cfg anytime.

	Note
If you want to change values in the configuration file orient at the values displayed in AutoCAD.

Note

If you want to change values in the configuration file orient at the values displayed in AutoCAD.

Prev	Up	Next
2.3.1.2.1. "Layer" configuration	Home	2.3.1.2.1.2. Example

Manual

Login

Top Links

Manual

2.3.1.2.1.1. Structure on a single "Layer" block