Manual
Login
Our 3D CAD supplier models have been moved to 3Dfindit.com, the new visual search engine for 3D CAD, CAE & BIM models.
You can log in there with your existing account of this site.
The content remains free of charge.
Top Links
Manual
 |
- 2.3.3.1. Block [INTERFACE]
- 2.3.3.2. Block [CreationOptions]
- 2.3.3.2.1. Key "FileName(is3dPart)"
- 2.3.3.2.2. Key "FileName(is3dAsm)"
- 2.3.3.2.3. Key "TemplateName(is3dPart)"
- 2.3.3.2.4. Key "TemplateName(is3dAsm)"
- 2.3.3.2.5. Key "poolPath"
- 2.3.3.2.6. Key "MaterialFile"
- 2.3.3.2.7. Key "Material"
- 2.3.3.2.8. Key "APPLY_PART_MATERIAL_TO"
- 2.3.3.2.9. Key "CREATE_THREADS"
- 2.3.3.2.10. Key "COLOR_FEATURES_00"
- 2.3.3.2.11. Key "SimplifyAssemblies"
- 2.3.3.2.12. Key "SKIP_ERRORS"
- 2.3.3.2.13. Key "CREATE_COMPONENTS"
- 2.3.3.2.14. Key "CREATE_SOLIDS"
- 2.3.3.2.15. Key "LOAD_CGR"
- 2.3.3.2.16. Key "CREATE_PUBLICATIONS_IN_PART"
- 2.3.3.2.17. Key "CREATE_AUTO_CST_SKETCH"
- 2.3.3.2.18. Key "SAVE_DOCUMENT_TYPE"
- 2.3.3.2.19. Key "CREATE_CGR"
- 2.3.3.2.20. Key "UseAsmMates"
- 2.3.3.3. Block [AttributeMapping]
- 2.3.3.4. Block [CATPartParameters]
- 2.3.3.5. Block [CATCompProperties]
- 2.3.3.6. Block [CATProdProperties]
- 2.3.3.7. Commands to adjust behavior/visibility of PARTsolutions interface menu and workbenches
In the
configuration file ifcatia.cfg (ifcatia_start.cfg) you can find
all settings for the CATIA V5 integration.
The most important information is found in the single blocks and keys, in the configuration file itself.
In the following you can find more comprehensive information on some blocks and keys.
Syntax und essential concepts are found under Section 2.2, “CAD encompassing information ”.
![[Note]](/community/externals/manuals/partsolutions_admin_en/v11/images/note.png) |
Note |
|---|---|
Changes at configuration files should only be performed by experienced users or CADENAS Consultants. | |
