Manual
Login
Top Links
Manual
 |
- 2.3.3.1. Block [INTERFACE]
- 2.3.3.2. Block [CreationOptions]
- 2.3.3.2.1. Key "FileName(is3dPart)"
- 2.3.3.2.2. Key "FileName(is3dAsm)"
- 2.3.3.2.3. Key "TemplateName(is3dPart)"
- 2.3.3.2.4. Key "TemplateName(is3dAsm)"
- 2.3.3.2.5. Key "poolPath"
- 2.3.3.2.6. Key "MaterialFile"
- 2.3.3.2.7. Key "Material"
- 2.3.3.2.8. Key "APPLY_PART_MATERIAL_TO"
- 2.3.3.2.9. Key "CREATE_THREADS"
- 2.3.3.2.10. Key "COLOR_FEATURES_00"
- 2.3.3.2.11. Key "SimplifyAssemblies"
- 2.3.3.2.12. Key "SKIP_ERRORS"
- 2.3.3.2.13. Key "CREATE_COMPONENTS"
- 2.3.3.2.14. Key "CREATE_SOLIDS"
- 2.3.3.2.15. Key "LOAD_CGR"
- 2.3.3.2.16. Key "CREATE_PUBLICATIONS_IN_PART"
- 2.3.3.2.17. Key "CREATE_AUTO_CST_SKETCH"
- 2.3.3.2.18. Key "SAVE_DOCUMENT_TYPE"
- 2.3.3.2.19. Key "CREATE_CGR"
- 2.3.3.2.20. Key "UseAsmMates"
- 2.3.3.3. Block [AttributeMapping]
- 2.3.3.4. Block [CATPartParameters]
- 2.3.3.5. Block [CATCompProperties]
- 2.3.3.6. Block [CATProdProperties]
- 2.3.3.7. Commands to adjust behavior/visibility of PARTsolutions interface menu and workbenches
![[Hinweis]](/community/externals/manuals/partsolutions_admin_de/v11/images/note.png)
In the
configuration file ifcatia.cfg (ifcatia_start.cfg) you can find
all settings for the CATIA V5 integration.
The most important information is found in the single blocks and keys, in the configuration file itself.
In the following you can find more comprehensive information on some blocks and keys.
Syntax und essential concepts are found under Abschnitt 2.2, „CAD-übergreifende Informationen“.
