English
Deutsch
Español
Français
Hrvatski
Italiano
Polski
Türkçe
Русский
中文
日本語
한국어
Legal notice
powered by CADENAS

Manual

Top Links

Manual

5.13.10. Classify Electrical Parts
5.13.10.2. Classification according to IEC Code 81346_2
Prev   Next

5.13.10.2. Classification according to IEC Code 81346_2

Classifying according to EN 81346-2 is mandatory.

Under Class CNSELEK -> Attribute CNSIECCOD with Description IEC_81346_2_CODE, set respective value.

In EN 81346-2, the code letter of main classes for purpose and task of objects is determined. For details see https://de.wikipedia.org/wiki/EN_81346 -> EN 81346-2: Classification of objects and code of classes (IEC 81346-2:2009)

Excerpt from the table of main classes (A1):

Code letter Purpose or task
A Two or several purposes or tasks (Note: This class is only intended for objects without main purpose)
B Change signal variable (physical property, state or result) in a signal for processing
C Storage of material, energy or information
... ...
X Object connection

Examples:

Cable = W | Connector = X | Terminal = X | Display = P

Result in E3

Component Properties - Device letter code and other properties

Component Properties - Device letter code and other properties

Prev  Up  Next
5.13.10.1.3.3. Manipulation of axes orientation (PARTproject) and part orientation (PARTdesigner)  Home  5.13.10.3. Symbol connectors / Symbol representations (Circuit symbols) "Advanced"