Manual

Our 3D CAD supplier models have been moved to 3Dfindit.com, the new visual search engine for 3D CAD, CAE & BIM models.

You can log in there with your existing account of this site.

The content remains free of charge.

5.4.1.3. Radial dimensioning 5.4.1.3.1. Mandatory parameters
Prev	Next

Each dimensioning must contain the following parameters:

ID

The ID is automatically set.
Type

When creating a new dimensioning at first a selection dialog box for the type definition appears. The type is displayed here.

If it makes sense you may change the type via list field.

Note

The parameter fields are not updated until you have clicked Save changes .
Views

At the desired 2D views, where the dimensioning shall be displayed, activate the checkbox.
Connection point

Connection point for the dimensioning arrow.

(The measuring distance [see next point] determines, where the arrow is visibly inserted.
1. In the 3D view, click on the desired connection point.
  
  -> This is marked in red now.
2. Click into the input field of the point.
3. Enter the name of the point via Ctrl+V from the clipboard into the input field.
  
  Example
Measuring distance (e.g. the circle radius)

Specify a fixed value or better a variable
Offset length

Specify a fixed value or better a variable
Angle of arrow

e.g. 45 (only insertion of the numerical value)

Prev	Up	Next
5.4.1.3. Radial dimensioning	Home	5.4.1.3.2. Optional parameters