Manual

Our 3D CAD supplier models have been moved to 3Dfindit.com, the new visual search engine for 3D CAD, CAE & BIM models.

You can log in there with your existing account of this site.

The content remains free of charge.

4.11.3.1. Prerequisites 4.11.3.1.2. Activating ERP Number Generator
Prev	Next

Before you can use the ERP Number Generator you must make the appropriate settings in PARTadmin.

In PARTadmin, under CADENAS_SETUP open the configuration file erpcustom.cfg in the dialog area Category.

Set the settings as follows:

TIMESTAMPNR=0
ERPNR_ENABLED=0 (Activate the key - if needed - per right-click on the key name)
erp_nrgenerator (Activate the key per right-click on the key name)

Save changes.

Now both keys ERP_NRGENERATOR and ERP_NRGENERATOR_CONDITIONS are used.

With both these keys you define the pattern after which the ERP numbers are to be generated.

Prev	Up	Next
4.11.3.1.1.1. CNSSEQ Table	Home	4.11.3.2. Incorporate ERP number into the PARTdataManager