powered by CADENAS

Manual

Manual

5.14.3.1. Value take-over from the Measure dialog window

The Transfer button can be used for classifying native parts.

Do the following:

  1. In PARTdataManager, open a native part.

  2. With Table --> Edit call up the Create tables window.

    Assign a classification to the native part (for example, under eClass 5.1) [compare above].

  3. Under Attributes (classification) via the browse button ..., open the Class variables window.

  4. Select a class attribute.

    Cursor in "Value" field

    Cursor in "Value" field

  5. Set cursor on Value field.

  6. In the 3D view, in context menu, click on Measure....

    --> The Measure dialog window is opened.

    2 parallel planes marked -> ABS = 16.000 transferred

    2 parallel planes marked -> ABS = 16.000 transferred

    In the 3D window, mark the desired areas, lines, points, etc.

    Click on Transfer.

    --> The value is assigned to the currently selected class attribute.

    Value assigned from the Measure dialog

    Value assigned from the Measure dialog

    Detailed information on the Measure dialog can be found under Section 3.1.7.6.3, “ Measurement of 3D parts ” in PARTsolutions / PARTcommunity4Enterprise - User manual.

  7. Confirm with OK.

    The attribute has been entered in the dialog Create tables.