Manual

Our 3D CAD supplier models have been moved to 3Dfindit.com, the new visual search engine for 3D CAD, CAE & BIM models.

You can log in there with your existing account of this site.

The content remains free of charge.

3.1.7. Part view 3.1.7.2. Determine characteristic in "Vertical" view
Prev	Next

As an alternative to Table view parts can be displayed in Vertical view.

The figure exemplary shows ISO 4762 immediately after loading still without any changes

The vertical view shows the following columns:

Name of variable with Variable description
Variable value

There are different options:
- Fixed value
- Value selection of a standard variable
- Value selection of a value range variable
Via input fields, list fields, sliders, etc., the value can be adjusted (if that is possible in general).
Symbol to describe the variable's current status of selection

Especially interesting is whether a characteristic is sufficiently specified and/or there are still options.

The following table explains the different symbols:

Meaning

Fixed value

The variable contains a fixed value which cannot be changed.

There are some values possible at the moment.

When selecting a value the following happens in the list field:

Example: D has been set on the value 1.6. As a result for L values greater or equal 20 are not possible anymore. These are displayed in blue now.

Filtered. Filtered variables restrict other selections.

Pinned value

The value has been pinned by clicking on or by direct value selection.

In the list field of the pinned variable all values are displayed in blue, excluded the set one, this is black.

Note

That does not mean, you cannot change values anymore.

However, when selecting a blue value all settings made before are removed.

Filtered variables restrict depending variables. There, values not available anymore are also colored in blue.

Variables not hit by the filter remain black.
By clicking on the symbol, the filter can be removed. Then the original symbol is displayed again.