powered by CADENAS

Manual

Manual

5.4.14.  Define dependency between parts

Via the function Define dependency between parts, you can define distance and location in space for unconnected parts.

  1. Click on part 1.

    -> Part is marked in red.

  2. In the Details dialog area the possible connection points are shown.

  3. Select the desired connection point.

  4. Click on part 2.

    -> Part is marked in blue.

Define connection points of part 1 and 2

Define connection points of part 1 and 2

Connection point defined

Connection point defined

  1. Under Details select the desired connection point as well.

  2. Confirm with OK.

  3. The distance piece is inserted.

Distance piece inserted

Distance piece inserted

You also have the option of adjusting positioning further via the table. In the table click on the fields X, Y, Z, PITCH (rotation around X-axis), YAW (rotation around Y-axis), ROLL (rotation around Z-axis) and change the values accordingly.

Change distance and/or rotation

Change distance and/or rotation