powered by CADENAS

Manual

Manual

2.5.12.2.3. Insert connection from PARTsolutions

In the Connection section you can determine whether holes have to be inserted at export or not via click on one of these icons:

The following figure shows the selection of a hexagon bolt and the selection of the hole ISO 273f at bolt and nut side.

Connection with holes

Connection with holes

In the tree view you can see the difference: At bolt 1 the hole has been transferred in addition, at bolt 2 not.

When you hide the bolts, then you see the difference in the 3D depiction as well.

Under Section 2.6.10, “ Insert Connection ” you can find a general description of the Connection section.

You can find detailed information on the Connection section under Section 3.1.1.10.4, “User interface in detail ”.