Manual

Login

Our 3D CAD supplier models have been moved to 3Dfindit.com, the new visual search engine for 3D CAD, CAE & BIM models.

You can log in there with your existing account of this site.

The content remains free of charge.

Manual

5.2.5. Context menu commands in 3D view 5.2.5.2. Connection points --- connect
Prev	Next

5.2.5.2. Connection points --- connect

The commands Disconnect part connection, Move/rotate part can be used, among other things, in order to add an additional part into a configuration later. Afterwards you connect the parts as shown below.

On part 3 select the connection point Side down and launch the command Left part for connection in the context menu
On part 2 select the connection point Back and launch the command connect with: 40x30 N in the context menu.

--> The parts are connected.

Via the buttons Move part to nut and Rotate part around connection point you can go back to the desired position.

Left part for connection

Connect to: 40x40 N

Prev	Up	Next
5.2.5.1. General	Home	5.2.5.3. Configure linear system

Manual

Login

Top Links

Manual

5.2.5.2. Connection points --- connect