Latest News

• 
  (EN) Plan buildings effectively with eCl@ss & BIMcatalogs.net by CADENAS

  Posted June 7, 2018 by Caro Risinger

  

  Sustainable BIM communication between the manufacturer of construction components and architects, planners and civil engineers Large building projects, such as a hospital, a railway station or an airport, take a very long time to complete due to a lack of communication between the individuals responsible for the respective construction phases, often longer than planned. Building Information Modeling (BIM) serves as a necessary measure to o...

• 
  (EN) PARTcloud.net member: Sanket Patil

  Posted June 6, 2018 by Dalibor Pejicic

  

  We would like to introduce our most active members on PARTcloud.net every two weeks. The goal is to find out more about them, but also to show our appreciation for their contribution.   June 2018: Sanket Patil     https://b2b.partcommunity.com/community/profile/818917       1. Can you tell us a little bit more about yourself and your background? My full name is Sanket Dhananjay Patil. I am pursuing Mech...

• 
  (EN) PARTcommunity Version 8 sets standards for the 3D CAD download of the future

  Posted June 5, 2018 by LiNa

  

  New features support engineers and purchasers in product development even more effectively now CADENAS GmbH has published the latest version of the well-known 3D CAD models download portal PARTcommunity. Besides millions of intelligent engineering data of renowned component manufacturers, PARTcommunity Version 8 offers engineers and purchasers many innovations and features, thus making use even easier and more intuitive, for example: ...

• 
  (EN) FAI F3K World Cup 2018 - Croatia

  Posted June 1, 2018 by Dalibor Pejicic

  

  Aero Club “BROD”, supported by Croatian Aeronautical Federation, is a host of the FAI F3K World Cup 2018 – Discuss Launch Gliders. Competition is held on sport airfield “Jelas” on 2nd and 3rd of June 2018. F3K is one of the most attractive categories in aviation modelling considering its specific launching technique. This is the first time that this kind of competition is held in Slavonski Brod. More than 25 compet...

• 
  (EN) TENADO extends its CAD solution with intelligent engineering CAD data powered by CADENAS

  Posted May 29, 2018 by Caro Risinger

  

  TENADO and CADENAS – handshake for good cooperation More parts, more advantages for everybody – the German CAD software company TENADO and CADENAS, software manufacturer in the areas of Strategic Parts Management and parts reduction, are now working hand in hand. Under the name TENADO PARTS, an ADD-ON software will be available starting in June 2018, which will supplement the TENADO programs for the intelligent engineer...

• 
  (INT) A List of 3D Forums & Communities - PARTcloud.net mentioned by Livewire.com

  Posted May 28, 2018 by Jürgen Heimbach

  

  A List of 3D Forums & Communities Where to show your 3D artwork     by Justin Slick Updated January 29, 2018 It's critical for a budding 3D artist – or any artist, really – to regularly show their work. Why isolate yourself any more than you have to when the computer graphics industry has such a vibrant online community surrounding and supporting it? Getting involved in the online computer graphics co...

• 
  (EN) Mencom Announces Easy, Flexible and Reliable Modbus Gateways for Seamless Conversions in harsh Environments at IMTS 2018

  Posted May 24, 2018 by Eddie Choi

  

  Since its debut, Modbus has become one of the most popular protocols used worldwide. Modbus RTU (through serial connection) and Modbus TCP (through Ethernet networks) are often used in the crucial parts of industrial automation, substation automation, and building automation. Due to the slow migration of communication standard from serial-based (RS-232, RS-485, and RS-422) devices to Ethernet-based devices, however, a demand has been created for ...

• 
  (EN) PARTcloud.net member: Josip Jakubiv

  Posted May 16, 2018 by Dalibor Pejicic

  

  We would like to introduce our most active members on PARTcloud.net every two weeks. The goal is to find out more about them, but also to show our appreciation for their contribution. May 2018: Josip Jakubiv     https://b2b.partcommunity.com/community/profile/77155         1. Can you tell us a little bit more about yourself and your background? I am an electrical engineer, born and raised in Slavonski B...

• 
  (EN) PUTZIN simplifies the design of complex lubricating systems thanks to intelligent 3D CAD models of its gear pumps

  Posted May 16, 2018 by LiNa

  

  Extension of the PUTZIN digital product catalog with important metadata such as weights and customs tariff numbers with CADENAS technology As early as the beginning of 2015, PUTZIN Maschinenbau GmbH provided customers and prospects with its entire product program of gear pumps and aggregates for free download in over 100 common native formats. This was made possible by the CADENAS Electronic Product Catalog eCATALOGsolutions. The existin...

• 
  (EN) PARTcloud.net member: Winston Jennings

  Posted May 4, 2018 by Dalibor Pejicic

  

  We would like to introduce our most active members on PARTcloud.net every two weeks. The goal is to find out more about them, but also to show our appreciation for their contribution. May 2018: Winston Jennings     https://b2b.partcommunity.com/community/profile/604473       1. Can you tell us a little bit more about yourself and your background? I am an engineering student that has a huge passion for all thi...

• 
  (EN) How component manufacturers can take advantage of environmental standards as a competitive edge

  Posted May 3, 2018 by LiNa

  

  The labelling of RoHS, REACH, EMAS, WEEE and ISO 14001 compliant components in eCATALOGsolutions supports component selection in engineering Environmental protection is also an issue in the development of new technical products in engineering. The European Directive 2011/65/EU, called RoHS II, regulates the use of certain hazardous materials in electrical and electronic devices. Since 22 July 2017, the so-called RoHS Directive also p...

• 
  (EN) Sparks Belting Company provides 3D CAD models for motorized pulleys in all-new online catalog built by CADENAS

  Posted April 26, 2018 by Caro Risinger

  

  Conveyor belt manufacturer and distributor eases their customer’s digital experience by providing 3D CAD models of configurable motorized pulleys Sparks Belting Company has launched an all-new online catalog of 3D CAD models for their popular Dura-Drive Plus motorized pulleys. Built by CADENAS, the configurator makes doing business with Sparks easier than ever by enabling customers to find, configure and download a digital 3D CAD mod...

• 
  (EN) 3D printed project: a glider!

  Posted April 26, 2018 by Dalibor Pejicic

  

  This article is about our latest 3D printed project - a glider. With short "step by step" guide lines, we will show you how it was done. Hope you like it!     1. After we collected all available info, 3D modeling was the first step needed for this project. It was quite easy job to do considering it is a simple model. https://b2b.partcommunity.com/community/partcloud/index?route=part&name=Glider&model_id=67339     &nbs...

• 
  (EN) Springtime is a time of growth – 3D CAD downloads of PARTcommunity achieve a record of over 25.9 million in the month

  Posted April 24, 2018 by Caro Risinger

  

  March continued the increasing trend of users and numbers of downloads With the first rays of sunshine in spring, plants begin to sprout everywhere. Very similar to the CADENAS 3D CAD models download portal PARTcommunity: In March 2018 for the first time within a month, over 25.9 million 3D CAD models were downloaded by engineers and purchasers. Bright prospects for 2018 The 3D CAD models download portal PARTcommunity c...

• 
  (EN) PARTcloud.net member: Martin Boillat

  Posted April 18, 2018 by Dalibor Pejicic

  

  We would like to introduce our most active members on PARTcloud.net every two weeks. The goal is to find out more about them, but also to show our appreciation for their contribution. April 2018: Martin Boillat   https://b2b.partcommunity.com/community/profile/644593       1. Can you tell us a little bit more about yourself and your background? I am a French student (mechanical engineering) and I am 21 years old. I...

• 
  (EN) Intelligent Finding instead of Part Safari – Track hidden components with CADENAS

  Posted April 17, 2018 by Caro Risinger

  

  How the search methods of the Strategic Parts Management PARTsolutions support engineers in their daily work Endless expanses, pure wilderness, fascinating animals: A safari is a unique experience. Equipped with binoculars and camera, you set out in search of those shy animals. Unfortunately, there is no guarantee that you will actually find any of them: In the worst case, you could travel around for a week without spotting a whole lot...

• 
  (EN) Mencom Serial Device Servers for legacy-devices integration to a new network infrastructure

  Posted April 16, 2018 by Eddie Choi

  

  Mencom Serial Device Servers are specifically designed to allow industrial devices to be directly accessible from the local network or even the Internet. Available in field-mount, din-rail mount or rack-mount versions from 1 up to 16 ports along with different Operation temperature/EMC variants, these serial device server series covers all the needs that end-users may have in converting Ethernet to Serial port (RS-232, RS-485, RS-422). In additio...

• 
  (EN) 2017 was no doubt the year of Industry 4.0 – The CADENAS year of success

  Posted April 13, 2018 by LiNa

  

  Exciting projects, awards and new things in the current CADENAS customer magazine The latest issue of the annual CADENAS customer magazine "Joint Success 2017" provides exciting insights into successful projects with customers and partners. The customer magazine also includes innovations in CADENAS software solutions as well as reviews on numerous events of the past year. "With our customer magazine, we not only want to show our technologi...

• 
  (EN) Harley Davidson Skull Keychain

  Posted April 11, 2018 by Dalibor Pejicic

  

  In this article, we will show how you can use 3D printing technology to create something funny and cool - a skull keychain. Harley Davidson came up recently with a new logo where they included a skull in it:   So, the owner of this Harley Davidson Sportster 883 wanted to have the same keychain, considering his motorcycle was custom painted and had the same skull on the gas tank.     So, 3D modeling was done and it was qui...

• 
  (EN) RK Rose+Krieger product catalog receives "Golden Catalog Seal" & now offers new spindle linear units "E"- configurator

  Posted April 10, 2018 by LiNa

  

  CADENAS awards the manufacturer's product catalog for linear units with the quality seal for an optimized offer of digital engineering data RK Rose+Krieger has been a customer of the German software manufacturer CADENAS since 2001. Since February of this year, engineers not only have access to the extended Electronic Product Catalog of RK Rose+Krieger but also to the new interactive product configurator of Move-Tec “E” assemb...