powered by CADENAS


News Options

Latest News

  • (EN) DMS and CMS magnetic sensor switches

    Posted November 14, 2018 by Presseservice CANVAS

    DMS and CMS magnetic sensor switches     AirTAC has recently realeased two new series of sensor switches for pneumatic cylinders: DMS e CMS series. These new series replace, respectively, the DS1 and CS1 series. The main difference between DMS and CMS is the mode of operation: DMS series are electronic sensor switches and they use Hall effect. You can choose the following versions: 2 wires, 3 wires PNP and 3 wires NPN. The wor...

  • (EN) UK BIM Alliance study shows a fresh way forward for manufacturer’s needing to provide a digital product representation

    Posted November 13, 2018 by Presseservice CANVAS

    UK BIM Alliance study shows a fresh way forward for manufacturer’s needing to provide a digital product representation The CADENAS BIM solution complies fully with their recommendations   Digital Construction Week 2018 in London saw the anticipated release of the UK BIM Alliance A fresh way forward for Product Data document. This report’s aim is to identify some of the key challenges to the digitalisation of product dat...

  • (EN) Linear Position Sensors Shock-Proof up to 200 g

    Posted November 12, 2018 by Presseservice CANVAS

    Turck's enhanced Li linear position sensors measure position values at a frequency of 5 kHz – at measuring lengths of up to 2 m   Turck has updated its contactless Li Q25 positioning systems and has now added new Extended variants to the program. The inductive measuring principle offers improved shock resistance and sampling rate compared to alternative measuring systems. With measuring lengths of up to 2 m, the Li sensors outper...

  • (EN) Schiedel expands its 3D BIM CAD data library by CADENAS in the sector of stove and heating systems

    Posted November 6, 2018 by Presseservice CANVAS

    Schiedel product catalog is awarded the "Golden Catalog Seal" Schiedel GmbH & Co. KG adds the 3D BIM engineering data of their energy-saving chimneys of the ABSOLUT series as well as the entire range of Kingfire stove and heating systems to their Electronic Product Catalog powered by CADENAS they have had since 2016. Architects and engineers can now configure and download even more products of the European market leader for chimney and flue ga...

  • (EN) Find components quickly and easily, even in large databases, thanks to PARTsolutions filter assistants

    Posted October 31, 2018 by Presseservice CANVAS

    Engineers and purchasers can find their way directly to the desired component with the CADENAS intelligent search function Butterfly caterpillars are very picky and usually prefer only a single fodder plant. As if that's not enough, another criterion of the search for the perfect fodder plant is it's location (sunny, semi-shady, wind-protected or damp). Also with the development of new products, the step by step narrowing down of right compone...

  • (EN) Make way for 3D BIM CAD product data at RAILBETON HAAS

    Posted October 31, 2018 by Presseservice CANVAS

    Manufacturer of concrete components for track and traffic-facility construction offers comfortable download of 3D BIM engineering data powered by CADENAS RAILBETON HAAS KG has been specialized in the planning and production of concrete components for industrial and traffic-facilities construction for over 80 years and now strives to be optimally equipped for the upcoming age of BIM. For this purpose, a first product group has been prepared, in...

  • (EN) Infographic: Industrial Communication Solutions - Modbus Gateway & Protocol Gateway

    Posted October 26, 2018 by Eddie Choi

    Mencom offers the industrial communication solutions; Protocol gateways for legacy systems integration & Modbus Gateways for the conversion from the serial-based devices to Ethernet-based devices.  

  • (EN) CADENAS Croatia is celebrating 18 years of success!

    Posted October 25, 2018 by Dalibor Pejicic

    CADENAS Croatia was founded on 16th of October 2000 in Slavonski Brod, Croatia. From a simple start and just few employees, Croatian branch grew up to approximately 150 employees and it is still growing. High quality work paid off and today they are responsible for more than 700 CAD product catalogs for well known companies around the world. Their motto is - The only way is forward!   Happy 18th Birthday CADENAS Croatia!     ...

  • (EN) Global product data management – Interview with Paul Surin, Head of Built Environment at Wienerberger AG

    Posted October 24, 2018 by LiNa

    Get insights into the manufacturer’s side of BIM and the decision making process at Wienerberger UK At Digital Construction Week (DCW) 2018 in London, Wienerberger has demonstrated the organization’s BIM-readiness by launching their new product data platform – a result of a collaboration between coBuilder and CADENAS. The platform showcases a new approach uniting interoperable, standard-based product data with 3D CAD mode...

  • (EN) Novelty: Realistic depiction of components thanks to individual textures & material properties in product catalogs

    Posted October 16, 2018 by St Be

    Component manufacturers benefit from new possibilities of visualizing their products in eCATALOGsolutions powered by CADENAS As of now, component manufacturers can enrich the 3D CAD models of their Electronic Product Catalog, based on the eCATALOGsolutions technology by CADENAS, with individual textures and material properties and thus present their products even more realistically. The respective colors and three-dimensional surface struc...

  • (EN) World Standards Day 2018

    Posted October 12, 2018 by LiNa

    October 14th is World Standards Day! How important standards are for engineering and how this can reduce product costs in development can be found here: https://bit.ly/2fdjq2V  

  • (EN) PARTcloud.net member: Dushyant Chourasia

    Posted October 10, 2018 by Dalibor Pejicic

    We would like to introduce our most active members on PARTcloud.net every two weeks. The goal is to find out more about them, but also to show our appreciation for their contribution.   October 2018: Dushyant Chourasia     https://b2b.partcommunity.com/community/profile/660421         1. Can you tell us a little bit more about yourself and your background? My name is Dushyant Chourasia (from India...

  • (EN) CADENAS and coBuilder unite to meet the full spectrum of BIM product information management needs

    Posted October 10, 2018 by LiNa

    Promotion of the collaborative BIM solution at the Digital Construction Week 2018 in London Stand-alone geometrical BIM features and disjointed technical documents are not enough to enable manufacturers of construction products (parts, components, systems) to meet the demand for BIM. More and more component manufacturers are faced with the difficult choice of selecting the right solution to support their digital transformation strategy. ...

  • (EN) Purdue University and CADENAS partner to enhance student learning of parts management technology with CAD and PLM systems

    Posted October 2, 2018 by LiNa

    By connecting industry, CAD suppliers and student learning through PARTsolutions, Purdue students are more prepared for careers in design and manufacturing The Department of Computer Graphics Technology at Purdue University has partnered with CADENAS to implement their Strategic Parts Management software PARTsolutions to expose students to industry-leading technology and real-world applications for careers in design engineering. PAR...

  • (EN) ILME Has Expanded Toolless SQUICH Technology to include 3 and 4 Pole (Size 21.21) Inserts

    Posted September 26, 2018 by Eddie Choi

    ILME “SQUICH” spring terminal rectangular connectors have provided easy quick-connect solutions for a variety of industrial machinery in rugged industrial environments. With the SQUICH (already open) spring insert technology, no tool is required to terminate rigid and or flexible cables (up to 2.5mm2) to the contacts in the connector. The SQUICH inserts are up to 50% faster to wire than the conventional screw terminal connectors. &nbs...

  • (INT) My first years without PARTcommunity.com

    Posted September 25, 2018 by Jürgen Heimbach

    My first years without PARTcommunity.com were #TERRIBLE I had to #DRAW everything by my own. I mad #MISTAKES because wrong dimensions I needed #MUCHTIME and it was exhausting I am #HAPPY taht PARTcommunity.com exist since last #MILLENIUM #Digital-Product-Transformation.com - #poweredByCADENAS

  • (EN) MOVET® offers 3D CAD models of its Blue Hygienic components via a CADENAS product catalog

    Posted September 24, 2018 by LiNa

    Blue flange bearings for food and pharma industries are available as a 3D CAD download MOVET® introduces its new product catalog based on the eCATALOGsolutions technology by CADENAS. Thanks to the new Electronic Product Catalog, 3D models of the blue flange bearing product is available to engineers and designers for the development of hygienic conveyor systems for the food and pharma industries. Customers and interested parties can s...

  • (EN) PARTcloud.net member: Lev Suvorov

    Posted September 21, 2018 by Dalibor Pejicic

    We would like to introduce our most active members on PARTcloud.net every two weeks. The goal is to find out more about them, but also to show our appreciation for their contribution.   September 2018: Lev Suvorov     https://b2b.partcommunity.com/community/profile/826733           1. Can you tell us a little bit more about yourself and your background? My name is Lev Suvorov and I am from R...

  • (EN) Berlin Marathon - Matko Bednjanec (CADENAS)

    Posted September 21, 2018 by Dalibor Pejicic

    Marathons are becoming more and more popular around the globe. One of the biggest is the BMW Berlin Marathon for a good reason: this year, it was the 45th edition and approximately 45.000 runners participated in it! It took place on the16th of September 2018 where Kenyan, Eliud Kipchoge, won the Berlin marathon and also broke the world record this year. One of the participating runners was our CADENAS employee Matko Bednjanec, who joined us 6 and...

  • (EN) A picture is worth a thousand words - Find the desired component with CADENAS Sketch Search

    Posted September 19, 2018 by LiNa

    Locate geometrically similar components easily and quickly in the Strategic Parts Management PARTsolutions Whether painted by an elephant or human hand – pictures say more than 1,000 words. Although we usually know what we mean or are looking for, it might be difficult to describe or to give it a name. That's the way it often goes when engineers and purchasers are in search of a component needed for their product. It's often easier a...