powered by CADENAS

News

News Options

Latest News

  • (EN) Smalley launches new nested series springs with online product configurator powered by CADENAS

    Posted Jun 17 by Presseservice CANVAS

    Industrial spring manufacturer standardizes a popular custom product line, while providing on-demand CAD access to engineers Smalley has accelerated access to the Nested Series of springs by standardizing the product line and providing instant access via the online product configurator built by CADENAS. Formerly a custom product, engineers can now configure and download these popular springs on-demand at https://smalley.partcommunity....

  • (EN) Just galactic! 3D CAD spaceship from CADENAS PARTcloud.net on the cover of a science fiction magazine

    Posted Jun 9 by Lina Na

    New type of spaceship as 3D CAD model was designed by Croatian CADENAS employee Honourable distinction for the 3D CAD model of a spaceship from the popular PARTcloud.net sharing portal powered by CADENAS: The 3D model named Marsonia was designed by Josip Jakubiv, an expert in 3D modeling and an employee of the Croatian CADENAS branch for 15 years. It has now even made it onto the cover of a Croatian science fiction magazine of the Marson...

  • (EN) How component manufacturers as early adopters can calmly face the current technology revolution

    Posted Jun 4 by Presseservice CANVAS

    Always ahead of the trends with CADENAS: Mastering Digitization with Digital Twins and an eCATALOG The current situation acts as an accelerator for the change already underway in terms of information technologies and digitization. It is precisely in times of global emergency that new technologies are being used in society, administration and especially in companies, the introduction of which would have been much slower in normal times. The ea...

  • (EN) Mencom introduce the new MIXO ONE series enclosures for single-sized MIXO modules

    Posted May 28 by Eddie Choi

    MIXO ONE series is an aluminum housings system designed to accept a wide range of single-sized MIXO series modules. These robust rectangular connector enclosures are available in 3 hood variants and 1 bulkhead mounting base. The numerous combinations of the MIXO ONE housings and single-sized MIXO inserts will easily allow each module to be converted into a fully independent connector for electrical power, data transmission, optical signals, or co...

  • (EN) New 3D CAD catalog available

    Posted May 25 by Presseservice CANVAS

    The products of Schaltbau GmbH are now available as 3D CAD models for free download. The snap-action switches & connectors can be configured individually, verified in a 3D preview and downloaded as a CAD model including interactive 3D PDF product data sheets. Check out CAD catalog here: https://schaltbau.partcommunity.com/ An example of a charging connector as 3D CAD model is shown here:

  • (EN) Implement ETIM Modeling Classes (MC) with CADENAS

    Posted May 19 by Presseservice CANVAS

    Provision of 3D BIM data based on ETIM classified product information now possible for component manufacturers with minimal effort The free classification standard ETIM (Electrotechnical Information Model) for the electronic exchange of product data presents data in a manufacturer-independent, media-neutral and equivalent manner in all languages and was previously based on textual, technical descriptions of components. Now it h...

  • (EN) Steampunk/industrial custom table

    Posted May 13 by Dalibor Pejicic

    All of us always wanted to make something special; a unique hand-made thing we can use on daily basis, but also something what will have our own artistic “touch” and value. In this case, our project was a steampunk/industrial table. You know what they say: measure twice – cut once. After several measuring, the right height, width and length was defined. Several different wood planks were glued together. It was important to find...

  • (EN) 46mn CAD downloads (= sales leads) in April send a clear signal of the great importance of digitalization

    Posted May 12 by Presseservice CANVAS

    With intelligent engineering data & digital twins, component manufacturers further expand their competitiveness Digitalization has been in full swing for several years now and is being accelerated even further by the current exceptional global situation. More than ever before, companies must invest in digital change and thus in digital product transformation in order to generate sales leads and thus secure their competitiveness in the future. ...

  • (EN) Certified SAE/AS native CAD standards: 3D parts models for Dassault SOLIDWORKS

    Posted Apr 29 by Presseservice CANVAS

    3D CAD models according to the SAE/AS Aerospace Standard of the Society of Automotive Engineers available through IHS Markit and PARTsolutions Engineers working in specialized, regulated industries are often required to specify the components within their projects are up to government standards. These unique components or "standards" are mandated for safety purposes on aerospace and defense projects, to ensure they have the strength and ...

  • (EN) Digitalization as competitive advantage: KRAUS Austria launches product configurator for conveyor rollers powered by CADENAS

    Posted Apr 22 by Presseservice CANVAS

    "At the pulse of time" - Interview about successful digitization and sales strategies for component manufacturers It is more important than ever for component manufacturers to be well positioned in terms of digitalization. The current situation in particular shows that companies that rely on digital sales strategies are already better positioned and will find it even easier to secure their competitiveness in the future. KRAUS Austria, wh...

  • (EN) Install the free plugin for BricsCAD now!

    Posted Apr 21 by Presseservice CANVAS

    Install the free plugin for #bricscad now! Over 800 digital manufacturer catalogs with millions of 3D CAD models for BIM, mechanics and electrics are available directly in your CAD system. https://bit.ly/2VKcu1I _______________________________________________________________________________________________________ Jetzt das kostenlose Plugin für #Bricscad installieren! Über 800 digitale Herstellerkataloge mit Millionen 3D CAD Modelle ...

  • (EN) Isinnova’s emergency oxygen therapy mask adapter for a snorkeling mask now available for 3D printing on PARTcommunity

    Posted Apr 15 by St Be

    Isinnova presents innovative valve that helps to adapt a snorkeling mask into an emergency device for oxygen therapy One of the problems related to current pandemic is the shortage of medical C-PAP oxygen therapy masks for sub-intensive therapy, especially in Italy. To deal with this problem, the Italian start-up Isinnova created a mask by readapting the Easybreath snorkel mask of Decathlon. The project is based on an idea of the former head p...

  • (EN) Direct Conveyors launches new 3D CAD catalog for their flat belt conveyors powered by CADENAS

    Posted Apr 14 by Presseservice CANVAS

    Conveyor manufacturer improves customer experience giving them new, useful tools Direct Conveyors, a conveyor manufacturer based in Indiana (USA), doubled-down on customer support by launching its all-new 3D CAD product catalog of configurable conveyor models, based on the eCATALOGsolutions technology by CADENAS The new online catalog features their 48 series flat belt conveyors. It generates part numbers, interactive 3D visualization, ...

  • (EN) CADENAS and the whole team wishes you and your relatives happy Easter and stay healthy!

    Posted Apr 9 by Presseservice CANVAS

    CADENAS and the whole team wishes you and your relatives happy Easter and stay healthy!

  • (EN) 19 % increase despite global exceptional situation: CADENAS records 45 million CAD models Downloads in March

    Posted Apr 8 by Presseservice CANVAS

    Numerous component manufacturers rely on digital product catalog solutions from CADENAS for their digitization strategy In the actual special situation, 3D CAD & BIM models of components are in greater demand than ever before, as the newly established download record shows: In March 2020, 45,706,094 CAD model downloads (=sales contacts) from the 3D CAD & BIM product catalogs of well-known manufacturers were achieved for the first time ...

  • (EN) PARTcloud.net Marsonia 3D model on cover page of Sci-Fi novel

    Posted Apr 7 by Dalibor Pejicic

      For years, our PARTcloud.net portal has been a „hub“ for 3D modeling enthusiasts from all over the world. Furthermore, it became a valuable source of various 3D models used by professionals and hobbyists. One of those amazing 3D models named Marsonia has found its place as a cover page of recent Sci-Fi book Marsonic.   The ancient name Marsonia dates from the Roman Empire period when it was given to city which is known ...

  • (EN) Why companies must be flexible, and prepared to rethink, or abandon tried and tested marketing strategies

    Posted Apr 2 by Presseservice CANVAS

    Product marketing needs a change in order to ensure competitiveness into the future It all began with the cancellation of trade shows and events. Since then, it has also become difficult for salespeople to make in-person appointments with customers. Since then, not only about 1868 trade shows (www.expodatabase.de/en, as of 02 April 2020) have been affected worldwide, but it has also become impossible for a sales representative to make a person...

  • (EN) Together we are strong: CADENAS supports local gastronomy in difficult times

    Posted Apr 1 by Presseservice CANVAS

    New CADENAS campaign for more solidarity: CEO sponsors lunch for employees & helps local restaurants to get more delivery orders Special times require special ideas: Therefore CADENAS as "The Innovation Company" starts a campaign to support the local economy and especially the gastronomy in a special way in the current difficult times. Since the end of March, CADENAS has been offering a delicious lunch to all employees who are holding down t...

  • (EN) https://www.mencom.com/news/case-study-el-pomar

    Posted Mar 31 by Eddie Choi

    About El Pomar El Pomar is a Colombian dairy company founded in 1953. They wanted to improve electrical safety at the factory. The Goal In order to achieve electrical safety, they were looking for solutions that could provide employees with a safer working environment and better protect electrical equipment at the production site while reducing the risk of downtime. The Challenges The most critical components in their equipment are th...

  • (EN) Eaton Emergency Lighting launches BIM product data for Revit, ARCHICAD, Allplan, SketchUp and Tekla

    Posted Mar 25 by Presseservice CANVAS

    Eaton extends existing CAD product catalog with BIM data in cooperation with CADENAS For many years, Eaton Corporation and CADENAS have worked closely together in providing intelligent and native mechanical CAD data. Now Eaton is expanding its proven 3D CAD model service with 3D BIM data for Emergency Lighting Luminaires, thereby significantly simplifying their use in construction projects and planning. Eaton is now providing its custom...