Latest News

• 
  (EN) UK BIM Alliance study shows a fresh way forward for manufacturer’s needing to provide a digital product representation

  Posted November 13, 2018 by Presseservice CANVAS

  

  UK BIM Alliance study shows a fresh way forward for manufacturer’s needing to provide a digital product representation The CADENAS BIM solution complies fully with their recommendations   Digital Construction Week 2018 in London saw the anticipated release of the UK BIM Alliance A fresh way forward for Product Data document. This report’s aim is to identify some of the key challenges to the digitalisation of product dat...

• 
  (EN) Linear Position Sensors Shock-Proof up to 200 g

  Posted November 12, 2018 by Presseservice CANVAS

  

  Turck's enhanced Li linear position sensors measure position values at a frequency of 5 kHz – at measuring lengths of up to 2 m   Turck has updated its contactless Li Q25 positioning systems and has now added new Extended variants to the program. The inductive measuring principle offers improved shock resistance and sampling rate compared to alternative measuring systems. With measuring lengths of up to 2 m, the Li sensors outper...

• 
  (EN) Schiedel expands its 3D BIM CAD data library by CADENAS in the sector of stove and heating systems

  Posted November 6, 2018 by Presseservice CANVAS

  

  Schiedel product catalog is awarded the "Golden Catalog Seal" Schiedel GmbH & Co. KG adds the 3D BIM engineering data of their energy-saving chimneys of the ABSOLUT series as well as the entire range of Kingfire stove and heating systems to their Electronic Product Catalog powered by CADENAS they have had since 2016. Architects and engineers can now configure and download even more products of the European market leader for chimney and flue ga...

• 
  (EN) Find components quickly and easily, even in large databases, thanks to PARTsolutions filter assistants

  Posted October 31, 2018 by Presseservice CANVAS

  

  Engineers and purchasers can find their way directly to the desired component with the CADENAS intelligent search function Butterfly caterpillars are very picky and usually prefer only a single fodder plant. As if that's not enough, another criterion of the search for the perfect fodder plant is it's location (sunny, semi-shady, wind-protected or damp). Also with the development of new products, the step by step narrowing down of right compone...

• 
  (EN) Make way for 3D BIM CAD product data at RAILBETON HAAS

  Posted October 31, 2018 by Presseservice CANVAS

  

  Manufacturer of concrete components for track and traffic-facility construction offers comfortable download of 3D BIM engineering data powered by CADENAS RAILBETON HAAS KG has been specialized in the planning and production of concrete components for industrial and traffic-facilities construction for over 80 years and now strives to be optimally equipped for the upcoming age of BIM. For this purpose, a first product group has been prepared, in...

• 
  (EN) Infographic: Industrial Communication Solutions - Modbus Gateway & Protocol Gateway

  Posted October 26, 2018 by Eddie Choi

  

  Mencom offers the industrial communication solutions; Protocol gateways for legacy systems integration & Modbus Gateways for the conversion from the serial-based devices to Ethernet-based devices.  

• 
  (EN) CADENAS Croatia is celebrating 18 years of success!

  Posted October 25, 2018 by Dalibor Pejicic

  

  CADENAS Croatia was founded on 16th of October 2000 in Slavonski Brod, Croatia. From a simple start and just few employees, Croatian branch grew up to approximately 150 employees and it is still growing. High quality work paid off and today they are responsible for more than 700 CAD product catalogs for well known companies around the world. Their motto is - The only way is forward!   Happy 18th Birthday CADENAS Croatia!     ...

• 
  (EN) Global product data management – Interview with Paul Surin, Head of Built Environment at Wienerberger AG

  Posted October 24, 2018 by Lina Na

  

  Get insights into the manufacturer’s side of BIM and the decision making process at Wienerberger UK At Digital Construction Week (DCW) 2018 in London, Wienerberger has demonstrated the organization’s BIM-readiness by launching their new product data platform – a result of a collaboration between coBuilder and CADENAS. The platform showcases a new approach uniting interoperable, standard-based product data with 3D CAD mode...

• 
  (EN) Novelty: Realistic depiction of components thanks to individual textures & material properties in product catalogs

  Posted October 16, 2018 by St Be

  

  Component manufacturers benefit from new possibilities of visualizing their products in eCATALOGsolutions powered by CADENAS As of now, component manufacturers can enrich the 3D CAD models of their Electronic Product Catalog, based on the eCATALOGsolutions technology by CADENAS, with individual textures and material properties and thus present their products even more realistically. The respective colors and three-dimensional surface struc...

• 
  (EN) World Standards Day 2018

  Posted October 12, 2018 by Lina Na

  

  October 14th is World Standards Day! How important standards are for engineering and how this can reduce product costs in development can be found here: https://bit.ly/2fdjq2V  

• 
  (EN) PARTcloud.net member: Dushyant Chourasia

  Posted October 10, 2018 by Dalibor Pejicic

  

  We would like to introduce our most active members on PARTcloud.net every two weeks. The goal is to find out more about them, but also to show our appreciation for their contribution.   October 2018: Dushyant Chourasia     https://b2b.partcommunity.com/community/profile/660421         1. Can you tell us a little bit more about yourself and your background? My name is Dushyant Chourasia (from India...

• 
  (EN) CADENAS and coBuilder unite to meet the full spectrum of BIM product information management needs

  Posted October 10, 2018 by Lina Na

  

  Promotion of the collaborative BIM solution at the Digital Construction Week 2018 in London Stand-alone geometrical BIM features and disjointed technical documents are not enough to enable manufacturers of construction products (parts, components, systems) to meet the demand for BIM. More and more component manufacturers are faced with the difficult choice of selecting the right solution to support their digital transformation strategy. ...

• 
  (EN) Purdue University and CADENAS partner to enhance student learning of parts management technology with CAD and PLM systems

  Posted October 2, 2018 by Lina Na

  

  By connecting industry, CAD suppliers and student learning through PARTsolutions, Purdue students are more prepared for careers in design and manufacturing The Department of Computer Graphics Technology at Purdue University has partnered with CADENAS to implement their Strategic Parts Management software PARTsolutions to expose students to industry-leading technology and real-world applications for careers in design engineering. PAR...

• 
  (INT) My first years without PARTcommunity.com

  Posted September 25, 2018 by Jürgen Heimbach

  

  My first years without PARTcommunity.com were #TERRIBLE I had to #DRAW everything by my own. I mad #MISTAKES because wrong dimensions I needed #MUCHTIME and it was exhausting I am #HAPPY taht PARTcommunity.com exist since last #MILLENIUM #Digital-Product-Transformation.com - #poweredByCADENAS

• 
  (EN) MOVET® offers 3D CAD models of its Blue Hygienic components via a CADENAS product catalog

  Posted September 24, 2018 by Lina Na

  

  Blue flange bearings for food and pharma industries are available as a 3D CAD download MOVET® introduces its new product catalog based on the eCATALOGsolutions technology by CADENAS. Thanks to the new Electronic Product Catalog, 3D models of the blue flange bearing product is available to engineers and designers for the development of hygienic conveyor systems for the food and pharma industries. Customers and interested parties can s...

• 
  (EN) PARTcloud.net member: Lev Suvorov

  Posted September 21, 2018 by Dalibor Pejicic

  

  We would like to introduce our most active members on PARTcloud.net every two weeks. The goal is to find out more about them, but also to show our appreciation for their contribution.   September 2018: Lev Suvorov     https://b2b.partcommunity.com/community/profile/826733           1. Can you tell us a little bit more about yourself and your background? My name is Lev Suvorov and I am from R...

• 
  (EN) Berlin Marathon - Matko Bednjanec (CADENAS)

  Posted September 21, 2018 by Dalibor Pejicic

  

  Marathons are becoming more and more popular around the globe. One of the biggest is the BMW Berlin Marathon for a good reason: this year, it was the 45th edition and approximately 45.000 runners participated in it! It took place on the16th of September 2018 where Kenyan, Eliud Kipchoge, won the Berlin marathon and also broke the world record this year. One of the participating runners was our CADENAS employee Matko Bednjanec, who joined us 6 and...

• 
  (EN) A picture is worth a thousand words - Find the desired component with CADENAS Sketch Search

  Posted September 19, 2018 by Lina Na

  

  Locate geometrically similar components easily and quickly in the Strategic Parts Management PARTsolutions Whether painted by an elephant or human hand – pictures say more than 1,000 words. Although we usually know what we mean or are looking for, it might be difficult to describe or to give it a name. That's the way it often goes when engineers and purchasers are in search of a component needed for their product. It's often easier a...

• 
  (EN) German newspapers DIE WELT & Süddeutsche Zeitung inform in BIM special supplements 1 million potential readers about BIMcatalog

  Posted September 13, 2018 by Lina Na

  

  Why BIM begins with the communication between planners and manufacturers The German daily newspapers DIE WELT and the Süddeutsche Zeitung move the topic of BIM and the current challenges for the construction industry into focus with their special supplements to 1 million potential readers. Included is an article by the software manufacturer CADENAS on the topic of: Why BIM begins with the communication between planners and manuf...

• 
  (EN) How manufacturers can provide perfect product data for the foodservice market

  Posted September 12, 2018 by Lina Na

  

  63% of designers say that they do not receive ready-to-use content from food equipment manufacturers (FCSI Study 2018). Learn how your customers can easily access your digital product data online as well as configure the equipment and download it as 2D & 3D CAD data: www.cadenas.de/horeca #foodequipment; #ibamunich18 #efcembim #ifse #horeca