powered by CADENAS



PARTsolutions / PARTcommunity4Enterprise - Administration Manual


Edition V11.00 SP0, 04/2017

The text and illustrations have been prepared with great care. However, CADENAS GmbH, its authors and translators can assume neither legal responsibility nor any liability for any errors that may remain or consequences thereof. The information contained in this manual is provided without warranty and may be modified at any time without notice. CADENAS GmbH accepts no responsibility in this regard.

This manual is protected by copyright law. All rights reserved. The rights to the documentation are owned by CADENAS GmbH. No part of this book may be reproduced in any form by photocopying, microfilm or any other method or transmitted in a machine-readable language, particularly for print processing machines, without the written consent of CADENAS GmbH. Rights to transmission by radio and television or live presentation are also reserved.

Copyright 1992-2017 CADENAS GmbH. All rights reserved.

CADENAS, PARTsolutions, PARTdataManager, PARTshaft, PARTconnection, eCATALOGsolutions, PARTdesigner, PARTconfigurator, PARTdxfconverter, PARTlanguage, PARTident, PARTeditor, PARTproject, PARTmedia, Visual Configurator, PARTserver, PDMsolutions, PARTwarehouse, PARTdataCenter are trademarks of CADENAS GmbH, Augsburg. All further brand names, company names or product names are trademarks or registered trademarks of their rightful owners.

All information given without liability.

CADENAS GmbH Augsburg
Berliner Allee 28 b+c
86153 Augsburg
Phone: +49 / (0) 821 / 2 58 58 0-0
Fax: +49 / (0) 821 / 2 58 58 0-999
Hotline: +49 / (0) 821 / 2 58 58 20
License request (Fax): +49 / (0) 821 / 2 58 58 2-999
Internet: www.cadenas.de
CADENAS Italiana s.r.l.
Via Bassa Dei Sassi 1
I-40138 Bologna (BO)
Tel.: +39 - 051 - 0870755
Fax: +39 - 051 - 0419105
14 rue Philibert Collet
F-01400 Châtillon sur Charlaronne
Tel.: +33 (0)4 81 30 00 04
Fax: +33 (0) 4 74 55 26 96
Hotline: +49/ (0) 821 / 258 58 22 77
E-mail -support:
C / Berruguete 90, bajos
E - 08035 Barcelona
Phone: +34 / 932 749 540
PARTsolutions LLC. USA
200 Techne Center Dr., Suite 118
Milford, OH 45150 USA
Phone: +1 / (513) 453 - 04 53
Fax: +1 / (513) 453 - 04 60
Internet: www.part-solutions.com
Donga Venture Tower, 907
305-301 Bongmyung-dong,
Yusong-gu, Deajeon, Korea-Süd
Phone: +82 / 505 / 936 - 93 60
CADENAS web2cad INC. Japan
8-4-1, Toshima, Kita-ku
Tokyo 114-0024, Japan
Phone: +81-3-59 61 - 50 31
Fax: +81-3-59 61 - 50 32
CADENAS GmbH Shanghai
CADENAS GmbH Shanghai Rep. Office
Nr. 885 the People Road
Huaihai Zhonghua Building, 603 Room
200010 Shanghai
People's Republic of China
Phone: +86 / (0) 21 / 63551318
Fax: +86 / (0) 21 / 63551319

Table of Contents

1. PARTsolutions Administration / PARTadmin
1.1. Launch
1.1.1. Client authorization rights
1.2. Structure and functions of user interface
1.3. PARTsolutions
1.3.1. Language selection
1.3.2. Installed modules
1.3.3. Catalog update Catalog update Online Launch Welcome tabbed page Catalog update tabbed page Download tabbed page Check project changes in detail (after the installation) Check project changes in detail (before the installation) PARTupdate - Notification on available catalog updates Catalog installation / Catalog update: Offline Before the catalog installation Check and Compare Catalog versions
1.3.4. Index administration Function overview User interface of the Index administration at a glance Icons and display in the index tree Commands Generate new display index Update display index Cleanup versions Geometry import Context menus Overview of context menu commands Context menu commands in detail Update Full-text search index and Geometrical search index for finding topological values via Full-text search Geometrical search index for Partial search Manage fingerprints Index administration at the client computer and/or in user mode Display in user mode Restricted configuration options and commands Index administration - Background information
1.3.5. ERP environment Define Database interface
1.3.6. Material
1.3.7. Document types
1.4. CAD Registration Manager
1.5. eCATALOGsolutions
1.6. Translations
1.7. Configuration files
1.7.1. Editing of configuration files in PARTadmin User interface at a glance Export in text file Filtering blocks and keys Editing blocks and keys Adjust key values Activate key / Deactivate key Editing blocks, keys and key values Additional functions at $CADEANS_DEFAULTUSER Additional function with activated $CADENAS_SITESETUP
1.7.2. Editing configuration files on file level Translation of "Short description"
1.7.3. $CAEDENAS_DATA/datasetup avoid_parts.cfg classsystem.cfg Limit classification to projects, directories, catalogs replace_std.cfg General settings Settings on project level Settings on directory level
1.7.4. $CADENAS_DEFAULTUSER and $CADEANS_USER partconnection.cfg Key "StartupMode" Key "SynchronizeMode" Key "ErpMode" Key "ErpCondition" Key "ConnectionMode" Key "SkipHoleValuesFilter" Key "IgnorePrecisionOfHoles" Key "ReplacedParts" Key "WarnOnConnectionTypeSwitch" Key "UseTableRestrictions" Key "SkipLengthCalculations" Key "AlphaMode" Key "FormatInch" Key "ValueRangeResolveDepth" Key "ComputationIterations" Key "RecentFiles" partsolu.cfg Block [PROXY] Block [INDEXTREESEARCH] Key "SHOW_MISSING_INDEX_HINT" - Suppress note at missing search indexes Block [Common] Key "IsAdmin" - User mode partupdate.cfg Block [Common] Key "ShowInExcludeListButton" - PARTadmin Online-Catalog update: Show only specified catalogs pdatamgr.cfg Block [SettingsIndexTree] Key "HiddenItemToolbarEntries" - Set buttons in search result list visible or hidden via configuration file Key "PreviewPerLine" - Search results: Show line preview images Keys "DefaultCellSize" "MinCellSize" "MaxCellSize" - Adjust minimal and maximal tile size in the Symbols view Block [PARTCOMPARESETTINGS] Key "DisplayGeoDistances" - Tabular Compare - Display geometric similarity Block [ASSEMBLY] Key "automaticRecalcAfterFileOpen" - Configure mode for part recalculation Block [OPTIONS] Key "HIDEMODI" - Nominal thread and/or Core diameter in PARTdataManager Key "CAPTION3D" - Change title in 3D view prjdependency.cfg - Project dependencies in diagram form psolopt.cfg Block [SettingsIndexTree] - Settings for part selection Key "GenerateMissingTopologyData" - Suppress regeneration of missing topology data Key "ClickableVariables" - Search result - Clickable variables and values Key "SearchFilterHint_MaxResults" - Search result filtered - Control of message Key "ShowDisplayRanking" - Search results: Placement number Key "EnableOverlayPopup" - Search results: Popup window Key "LINKCLASSLIST" - Adjust dialog area "Links" Key "SHOWUSECASESDOCK" - Use Cases (Online) Key "ShowInstallHistory" - Show/hide Installation history Key "KeySynonyms" - Synonym editor Block [SettingsSearch] - Main settings for searching Keys "LoadGeometryEnabled" and "LoadFromCadEnabled" Key "VisibleSearchPages" - Visible search methods Key "GeoSearchHintStepSize" and "GeoSearchHintMinValue" - Search results: Extend minimum similarity at geometric search successively Block [SettingsTable] - Table settings Key "ShowOnlyPrefRanges" - Button Preferred ranges - Determine initial status Block [PARTCOMPARESETTINGS] Key "PreviewImageSize" - Part comparison - Enlarged preview image in the tooltip Block [InfoPane] - TagCloud reports.cfg Key "SearchForProjects" - Duplicate report - Comparison on project level reports.xml - Storage location of reports seamless.cfg Call up PARTadmin Key "ShowOnlyIcons" - Show only icons (no labels) Key "Show2dTab" - Show 2D derivation tabbed page Key "ShowCatalogFilter" - Show/hide "Manufacturer filter" on tabbed page "Catalogs" Key "ShowCatalogFilters" - Show/hide "Catalog filter" on tabbed page "Search" Key "RootNodes" - Show/hide main items on the tabbed page "Catalogs" Keys "ShowItemToolbar" and "HiddenItemToolbarEntries" - Show/hide specific buttons Key "HiddenContextMenuItems" - Show/hide context menu commands Key "HiddenSearchPages" - Show/hide search methods Key "TOP_SHOW_SYNONYM_BUTTON" - Show/hide checkbox for Synonym search Key "TOP_SHOW_HELP_BUTTON" - Show/hide Help button Keys "TOP_SHOW_SAVEQUERY_BUTTON" and "TOP_SHOW_LOADQUERY_BUTTON" - Show/hide button for "Load/save search templates" Key "TOP_OFFLINECD_MODE" - Search in / for show/hide Key "Tabs" - Adjust sequence and visibility of tabs (Part selection) Key "ViewTabs" - Adjust sequence and visibility of tabs (Part view) Key "CONTEXTMENU3D_HIDE" - Hide context menu commands in 3D view Block [ERP_HIDDENCOLUMNS] - Hide ERP columns Key "SeamlessWindowInCompareSide" - Seamless - Part comparison | Right-left setting startup_assistant.cfg Block [title_bottom] -> Key "url" Block [common] -> Key "show_next_time" varsearch.cfg Block [VariableSearch] Keys "FieldPriorizations" and "SynonymFieldPriorizationMultiplicator" - Full-text search: prioritization of fields to be searched Block: [DidYouMeanSearch] - Key "Enabled" - Did you mean on/off Block [SimilarWordsSearch] -> Key "Enabled" - Related results on/off
1.7.5. $CADENAS_SETUP Overview on configuration files under $CADENAS_SETUP 2dscales.cfg - Use scale for 2D view catalogicons.cfg - Icons on catalog preview image bugreport.cfg - Catalog Feedback cfginfo.cfg class_mod.cfg - Name mapping of published elements din962_global.cfg - Variants in screws and nuts (DIN 962) filesystems.cfg Caching of index files of $CADENAS_DATA on PARTapplicationServer Caching index files of $CADENAS_DATA on Search server geomsearch.cfg Block [settings] Key ShowMirroredIconPercentage - Configure visibility of mirrored parts Block [settings] Key PartialSearchCatalogs - Partial Search Geometry import - Maximum number of Triangles Geometry import - Maximum number of features Cache search results in working memory Caching for versions up to 9.07 Description of different caches Log file evaluation - Find best settings Caching / geometric search index as of V9.08 Structure of indices geomsearch.cfg -> Block [settings] - Common settings Creation of Geo and Topo indices Changes at the actual search Caching settings Log file evaluation - Find best settings Access on Topology values via VBS if<cadname>.cfg ifacecommon.cfg material.cfg (without ERP integration) material_assign.cfg (with ERP integration) menustructure_<application name>.cfg / menuvisibility_<application name>.cfg online_translators.cfg Use online translation services directly from PARTproject Configuration of the Online Translation Services Integration mode of translation service Structure of configuration file Google Translator - Create account Microsoft Translator - Create account pappclient.cfg pappserver.cfg partconnection.cfg Block [PARTconnection] Key "SkipErpRoleConditions" Key "LocalConnectionsPath" Key "SkipPrecalculation" Key "MergeOptions" Key "ShowSynchronizationMenu" Block [EXPORT] Block [NecessaryIndexes] Block [Unit] Block [Hole] Block [Counterbore] Block [Types] Blocks [<specification of types>] Key "ClassIdsSkipErp" partsol.cfg Block [Common] - Common settings Key "stlMaxTriangleCount" - Geometry import Key "ExportSubAssemblyStructure" - Support for subassemblies Block [VARSEARCHCLSVARS] Block [EOLService] - Show/hide lines to be avoided Block PARTindex - Report sharing Block [PARTdataManager] - Global settings for PARTdataManager Keys "TOP_SEARCHPATH_SELECTION_..." - Search path selection: Show/hide single options Key "TOP_SHOW_PATH_SELECTION" - Show/hide search path selection list field (Search in) Key "TOP_SHOW_VIEWMODE_BUTTON" - Show/hide view mode selection (Search for) Key "TOP_SHOW_SYNONYM_BUTTON" - Show/hide button "Search for synonyms" Key "TOP_SHOW_HELP_BUTTON" - Show/hide Help button Keys "TOP_SHOW_SAVEQUERY_BUTTON" and "TOP_SHOW_LOADQUERY_BUTTON" - Search templates Key "INDEX_SHOW_SEARCH_SETTINGS" - Button "Search settings" on/off Key "INDEX_SHOW_SAVEININDEX" - Button "Save search results in favorites" on/off Key "INDEX_SHOW_SAVEINFILE" - Button "Save search results in a file" on/off Key "INDEX_SHOW_GENERATE_FILTER_ASSISTANT" - Button "Extended search filter assistant" on/off Keys "TABCONTENT_..._ENABLED" and "TABCONTENT_..._HIDE_..." - Availability and visibility of tab content Key "TABCONTENT_SEARCHRESULT_DEFAULT_REQUEST_PATH" Key "TABBAR_PLUSBUTTON_ENABLED" - Plus button on/off Keys "PARTSELECTION_SHOW_..." / "PARTSELECTION_..._AS_TAB" - Show/hide "Structure" items or move on tab Key "TOP_SEARCHPATH_SELECTION_HEADER" - Search path selection: Show/hide headers Key "INDEX_SHOW_CATALOG_FILTER" - Restrict Search results via Catalogue filter Key "INDEX_SHOW_MAPVIEW" and "INDEX_SHOW_CLUSTERMAPVIEW" - Show/hide buttons for Cloud Map and Partition Map view Block [PARTdataManager] -> Key "STYLESHEETS" - Customer stylesheets for GUI elements Keys "TABBAR_ORDERABLE" and "TABBAR_ORDER" - Tabs: Allow drag & drop and tab order Block [PARTdataManager:CustomDockContent:0] - Create custom docks with a web-view via config Block [PARTcadAssistant] Key "EXE" - PARTcadAssistant Block [NATIVEPARTS] Key "NATIVEPOOLDIR" - Pool and project directory for native parts Block [FULLTEXTSEARCH] Key "SimilarityFactor" - Prioritize catalogs Block [INDEX:LUCENE] Key "TopologyCatalogs" - Find topological values with Full-text search pcdstart.cfg plinktemplates.cfg Catalog Quality Seal
1.7.8. Keys in catalog directory and subdirectories search.cfg dir.prj Key "SEARCHVARS" - Certain variables, always display
1.7.9. Optimize user interface Optimize user interface - Overview Tweak menus, menu items, toolbars, buttons and context menu commands Overview Tweak PARTdataManager user interface menustructure_PARTdataManager.cfg Block [Tweakmenu] Menus Toolbars Context menus Block [hasSubMenuActions] Block [AltButtons] menuvisibility_PARTdataManager.cfg Specification of modes (roles) PARTdataManager: Action names (key names) of menu items / buttons / context menu commands PARTdataManager: Action names (key names) of menu items and buttons PARTdataManager: Action names of context menu commands Tweak PARTproject user interface menustructure_PARTproject.cfg menuvisibility_PARTProject.cfg: Action names of menus, menu items, toolbars and buttons Settings in partsolu.cfg Tweak settings and scripting PARTdataManager GUI settings in partsol.cfg Activate/deactivate windows Define windows positioning Show/hide search methods
1.8. License administration
1.8.1. Open License administration
1.8.2. License Types
1.8.3. Clients "General" tabbed page Hostid sources Use FLM server "Licenses" tabbed page (Single workstation) Entering licenses... (Single workstation) Check licenses... (Single workstation) "Protocol" tabbed page "License product preselection" tabbed page "Request licenses online" tabbed page
1.8.4. FLM server Changes as of V10 Changes as of V9.03 Precondition for the usage of floating licenses FLM-Server - V9.03 + V8.1 - Different scenarios "Connected servers" dialog area "Licenses" tabbed page (FLM) Entering licenses... (FLM) Check licenses... (FLM) "Named User" tabbed page "Checkouts" tabbed page "Access control" tabbed page "Events" tabbed page "Security" tabbed page "Protocol" tabbed page "Status" tabbed page "Statistic" tabbed page "Request licenses online" tabbed page
1.9. PARTsynonym
1.10. More administrative setting options
1.10.1. Request parts via e-mail - Part information (Mident) attached as ".psmid" file (9.03)
1.10.2. Connections Connections General information Basic settings Execute script Connections: Always show holes (also without ERP integration) when "preferred rows" and "filtered tree" is on (9.03)
1.10.3. Batchconvert.exe
1.10.4. Replace_std.cfg - Adjust paths after V9 update
1.10.5. Define search template Search templates Algorithms Display algorithms in PARTdataManager Other settings Background information Indexes Index files
1.11. Logging
1.11.1. Global Logging System
1.11.2. Logging Viewer (9.03 SP2)
1.11.3. Crash dump (9.03 SP2)
2. PARTsolutions - CAD Integration - Administration
2.1. User interface in PARTadmin
2.2. CAD encompassing information
2.2.1. Syntax and concepts What are categories? Apply and use own categories Variable values - functions Interpretation of similar blocks with and without category Join blocks Configuring PARTsolutions interface menu and toolbar Use encrypted passwords in config file (9.04) Use macros
2.2.2. Set file name ("FileName" key) and pool path ("poolpath" key) Pool: flat or with subdirectories ("poolpath" key) File name: set generation options ("FileName" key) Reuse the V8.1 pools after migration to V9 File name with reuse of V8.1 pool Pool path for standard parts with reuse of v8.1 pool
2.2.3. Intelligent placement for standard parts
2.2.4. Attribute mapping User interface Structure of the block "AttributeMapping(is3d)" Value types Common hints for Attribute Mapping sections Examples Attribute mapping restricted to a special project Specify user defined attributes via categories Export standard attributes in several languages
2.2.5. Material mapping Material mapping without ERP integration Material name from the table Material mapping with ERP integration Background information Key "Material": Alternative methods Key "Material": Use input value as Fallback
2.2.6. Reverse AttributeMapping
2.2.7. Transfer attributes via CNS classification
2.2.8. General configuration file "ifacecommon.cfg" Block [Macros] Key "LEN_CHECK" Key "_CREATION_OPTION(" Block [CreationOptions] Key "NoSection" Block [UI] Key "DisplayCreationWarningLevel" Block [Placement] Key "PL_DisplayTrivialCases" Block [NativeCheckin] Key "IgnoreCheckinAttributes00" Key "ProcessDocumentState" Key "ProcessDimensions" Block [ClassMapping] Block [LOD] - Level of Detail
2.3. CAD specific information
2.3.1. AutoCAD Integration - Administration Block [UI] - Configuration of PARTsolutions menu and toolbar Block [CreationOptions] - Options for Layer and Shape settings "Layer" configuration Structure on a single "Layer" block Example "Shape" Configuration Structure of a single "Layer" block Example Attribute mapping in AutoCAD Block [AttributeMapping(is2d)] Declare prefix for standard attributes Block [CadDocumentAttributes(is2d)] - Transfer user defined attributes Block [BomNormalAttributes] - Define BOM list attributes Adjust BOM list attributes Block [NativeCheckin] Key "IgnoreCheckinAttributes01" Installation of AutoCAD 2014 interface Troubleshooting Installation - Deinstallation As of version 2011 User documentation
2.3.2. CATIA V5 Block [INTERFACE] Key "insertComponentFlexible" (FLEXIBLE_RIGID_SUBASSEMBLY) Key "DEBUG" Key "NativeCheckoutTargetFolder" Block [CreationOptions] Key "FileName(is3dPart)" Key "FileName(is3dAsm)" Key "TemplateName(is3dPart)" Key "TemplateName(is3dAsm)" Key "poolPath" Key "MaterialFile" Key "Material" Key "APPLY_PART_MATERIAL_TO" Key "CREATE_THREADS" Key "COLOR_FEATURES_00" Key "SimplifyAssemblies" Key "SKIP_ERRORS" Key "CREATE_COMPONENTS" Key "CREATE_SOLIDS" Key "LOAD_CGR" Key "CREATE_PUBLICATIONS_IN_PART" Key "CREATE_AUTO_CST_SKETCH" Key "SAVE_DOCUMENT_TYPE" Key "CREATE_CGR" Key "UseAsmMates" Block [AttributeMapping] Block [CATPartParameters] Block [CATCompProperties] Key "CATPRODUCT_INSTANCENAME" Block [CATProdProperties] Key "CATPRODUCT_PARTNUMBER" Commands to adjust behavior/visibility of PARTsolutions interface menu and workbenches Block [INTERFACE] - Keys with "_SHOW" - Load function Key "COMMAND_SHOW_PSOLPartDataManager" Key "COMMAND_SHOW_PSOLPartcadAssistant" Key "COMMAND_SHOW_PSOLPartConnect" Key "COMMAND_SHOW_PSOLList" Key "COMMAND_SHOW_PSOLReplace" Key "COMMAND_SHOW_PSOLRealign" Key "COMMAND_SHOW_PSOLSetup" Key "COMMAND_SHOW_PSOLSubtract" Key "COMMAND_SHOW_PSOLSubtractBodies" Key "COMMAND_SHOW_PSOLSubtractParts" Key "COMMAND_SHOW_PSOLDelHoles" Key "COMMAND_SHOW_PSOLCheckErrors" Key "COMMAND_SHOW_PSOLPartLoader" Key "COMMAND_SHOW_PSOLNCScan" Key "COMMAND_SHOW_PSOLPDPartDataManager" Key "COMMAND_SHOW_PSOLPDPartcadAssistant" Key "COMMAND_SHOW_PSOLPDSubtractBodies" Key "COMMAND_SHOW_PSOLPDRealign" Key "COMMAND_SHOW_PSOLPDNCScan" Key "COMMAND_SHOW_PSOLPDSetup" Key "COMMAND_SHOW_PSOLDRWPartConnect" Key "COMMAND_SHOW_PSOLDRWPartDataManager" Key "COMMAND_SHOW_PSOLDRWPartLoader" Key "COMMAND_SHOW_PSOLDRWSetup"
2.3.3. CoCreate Modeling Integration - Administration Block [CreationOptions(is3d)] - How to setup? Key "FileName" Key "DistributeMass" Key "EnhancedPhysicalProperties" - Calculation of Physical Properties Block [UI] - Adjust menus and toolbars Block [INTERFACE] Key "denied_value_char" Key "replace_char" - Replacement of characters Block [AttributeMapping(is3d)] Key "Attr_CopyFrom_01" Block [CadDocumentAttributes] NoSection Modelmanager - Configuration Trouble shooting Installation User documentation
2.3.4. Inventor Integration - Administration Block [CreationOptions(is3d)] Key "poolpath" - Set storage path for PARTsolutions parts Key "FileName" - Define structure of document name Key "TemplateFile" - Adjust templates Key "CreateIMates" Key "BomStructureType" Key "MATERIAL_DEFAULT_APPEARANCE" Key "Material" - Material mapping Key "ThreadGroupRx_xx" - Thread configuration Block [UI] - Adjust menus and toolbars Attribute mapping in Inventor Block [AttributeMapping(is3d)] - Set attribute language Declare prefix for PARTsolutions attribute Block [CadDocumentAttributes] - Transfer user defined attributes Block [DocumentInformation] Block [SummaryInformation] Block [DesignTracking] Block [NoSection] - Set parts not to be cut Several Inventor versions in parallel operation Troubleshooting Installation - Deinstallation User documentation
2.3.5. NX Integration - Administration Block [CreationOptions(is3d)] Key "Poolpath" Key "FileName" Key "material" Keys "feature_group_xx" Keys "layer_xx" Keys "LOD_REFSET_x" Key "PhysicalPropertiesMode" Key "NxOption_01" Key "UsePartExpressions" Key "PipingConnPoint" - NX routing function Block [INTERFACE] Key "ForceCreateNew3DPreviews" Block [UI] - Adjust menus and toolbars Key "PrepareMenu" - NX9 / Ribbon menu by default Block [AttributeMapping(is3d)] Key "Attr_CopyFrom_01" Block [CadDocumentAttributes] Add categories to attribute mapping Block [NativeCheckin] IgnoreCheckinAttributes01 NoSection Troubleshooting Installation - Deinstallation User documentation
2.3.6. Creo / PRO-Engineer Integration - Administration Block [CreationOptions(is3d)] Key "CreateDimensions" Automatic accuracy search Key "PoolPath" Key "FileName" Key "Material" TempAxisLayer Attribute mapping in Creo / ProEngineer Block [AttributeMapping(is3d)] Block [CadDocumentAttributes] - Transfer custom attributes User defined attributes with type declaration Adding new keys Block [MatMAP] - Material mapping in Creo/ProEngineer Block [UI] - Adjust menus and toolbars Activating the PARTsolutions interface in Pro/E User documentation
2.3.7. Solid Edge Integration - Administration Block [CreationOptions(is3d)] Key "poolpath" Key "FileName" Material(is3dpart) - Material mapping Key "DocumentState" Block [UI] - Configuration of PARTsolutions menu and toolbar NoSection Attribute mapping in Solid Edge Block [AttributeMapping(is3d)] Block [CadDocumentAttributes] - Transfer custom attributes Block [CadDocumentAttributes] - Transfer further extra attributes Block [ProjectInformation] Blocks [SummaryInformation] and [DocumentSummaryInformation] Fill more fields in Solid Edge with PARTsolutions attributes Field names in Solid Edge Set different languages for attributes Several Solid Edge versions in parallel operation Troubleshooting Installation - Deinstallation User documentation
2.3.8. SolidWorks Integration - Administration Block [CreationOptions(is3d)] Key "poolpath" - Set storage path for PARTsolutions parts Key "FileName" - Define structure of document name Key "Material" - Material mapping Key "sketchmode" Key "PipingConnPoint" Block [UI] - Adjust menus and toolbars Attribute mapping in SolidWorks Block [AttributeMapping(3D)] - Set attribute language Declare prefix for PARTsolutions attributes Block [CadDocumentAttributes] - Transfer custom attributes Key "IsFastener" Block [CadDocumentAttributes] - Transfer further extra attributes Block [SummaryInformation] Several SolidWorks versions in parallel operation Troubleshooting Installation - Deinstallation User documentation
2.3.9. SpaceClaim - Administration
3. PARTsolutions - PDM Integration
3.1. General Information
3.1.1. ERP/PDM as leading systems
3.1.2. Basic workflow for "direct" PDM linking
3.1.3. Comparison: "pool integration" - total integration
3.1.4. Show CAD documents (PDM-ID) in PARTdataManager
3.1.5. Write a log file
3.2. General Configuration
3.2.1. Control
3.2.2. Activating the interface if<pdmname>.cfg
3.2.3. Configuration - General hints
3.3. PDM specific configuration
4. Strategic Parts Management
4.1. Introduction
4.1.1. Integration
4.1.2. Target groups
4.1.3. Entire workflow
4.1.4. Integrating LinkDB Linkage Data transfer and data link Cyclical Replication Online Replication Direct Online linkage of LinkDB to ERP-DB New installation of parts using an ERP Interface
4.1.5. User-role concept
4.1.6. Support of company-internal workflows
4.1.7. Modules PARTsolutions/base module ERP linkdb PARTsolutions/base module ERP PARTsolutions/base module ERP CSV
4.2. Installation Link database
4.2.1. Hardware requirements
4.2.2. Installation von PARTsolutions parts management with PDM/ERP/PLM integration
4.2.3. Configuration of the database server connection (exemplified by MSSQL)
4.2.4. Create database scheme and users for ERP (exemplified by MSSQL) Installations script Base functionality Additional functionalities
4.2.5. Configure the data-source for ODBC (exemplified by MSSQL) Database connection via file DSN
4.2.6. JDBC driver Installation Configuration Jar files for other databases Configuration file jdbc.cfg
4.2.7. ERP connectivity from PARTsolutions via ODBC/JDBC and ERP activation dbproxy.cfg plinkcommon.cfg -> Block [Common] -> Key "DBName" - Determine ODBC data source name in PARTsolutions plinkcommon.cfg -> Block [PARTdataManager] -> Keys "ERPenabled" and "ERPenabledPPrj" - Activate ERP Starting PARTdataManager with ERP integration
4.3. Adding/removing database columns
4.3.1. Apply databases columns per SQL Scripting
4.3.2. Adding database column with PARTlinkManager
4.3.3. Set column visible in PARTdataManager
4.3.4. Removing database column
4.4. Save/restore database
4.5. PARTapplicationServer installation/configuration
4.5.1. General
4.5.2. Overview Multi Site Installation
4.5.3. Licenses for the PARTapplicationServer
4.5.4. PARTapplicationServer - Installation
4.5.5. Set up PARTapplicationServer as service
4.5.6. PARTapplicationServer - Configuration AppServer: Client configuration The respective keys and values of the configuration file Key combinations and values of the single GUI options Global and local specification of the settings - Privileges for Admin Caching client-sided PARTapplicationServer: Server configuration Caching index files of $CADENAS_DATA on PARTapplicationServer LinkDB queries Updates of ERP search index Logging of LinkDB changes Manual update and initial creation of LinkDB search index SSL encryption
4.5.7. PARTapplicationServer Watch
4.5.8. Set up ERP on PARTapplicationServer Overview on client connection mode to link database and login mode in PARTdataManager Example 1: Database connection via AppServer and manual user login Example 2: Database connection via AppServer and automatic user login Example 3: Direct database connection and manual user login Example 4: Direct database connection and automatic user login Troubleshooting
4.5.9. More information
4.6. Name rule for the CAD file name
4.7. ERP toolbar and menu
4.8. Table layout for PARTdataManager and (PARTlinkManager)
4.8.1. Adjust table values -> Adjust text / plinkcommon.cfg -> Block [MAPPING_<COLUMN_NAME>] - Key for visible text
4.8.2. Adjust table values -> Adjust color / plinkcommon.cfg -> Block [COLMAPPING_<variable name>] - Key COLORCODE<number>
4.8.3. Adjust table values -> Adjust text and color / plinkcommon.cfg -> Block [MAPPING_<variable name>] -> Key for visible text
4.8.4. Adjust table values -> Adjust color with condition / plinkcommon.cfg -> Block [COLMAPPING_<column name>] -> Key "COLORCOND<number>"
4.8.5. Adjust table values > Set bitmap / plinkcommon.cfg -> Block [BMPMAPPING_<column name>] -> Key "BMPCODE<number>"
4.8.6. Adjust table values -> Set bitmap with condition / plinkcommon.cfg -> Block [BMPMAPPING_<column name>] -> Key "BMPCOND<number>"
4.8.7. Background color for ERP/PDM columns / plinkcommon.cfg -> Block [GROUP_COLORS] -> Key GROUP<number>
4.8.8. Determine column color by indicator in ERP column (very special) / plinkgroups.cfg -> Block [<Role_name>] -> Key "COLORNUMBERTREE"
4.9. Modify column display - plinkcommon.cfg -> Block [LINKDBFIELDS] -
4.10. Basic design of "new ident-no." dialog box - erpcustom.cfg -> Block [USERDIALOG]
4.10.1. material_assign.cfg (with ERP integration)
4.10.2. Ignore custom set values for the combobox - Key "USERDIALOG_SKIPDBLOAD"
4.10.3. Change default description text for ERP_PDM_NUMBER - erpcustom.cfg -> Block [VARS] -> Key "USERDIALOG_ERPNR"
4.11. Timestamp number on/off
4.11.1. Automatically generated ERP_PDM_NUMBER at new creation of parts (on/off) - erpcustom.cfg -> Block [VARS] -> Key "TIMESTAMPNR"
4.11.2. erpcustom.cfg -> Block [dialogOnExport] - Automatic generation of ERP number: Export dialog for material and other fields yes/no
4.11.3. ERP Number Generator - erpcustom.cfg -> Blocks [ERP_NRGENERATOR] und [ERP_NRGENERATOR_CONDITIONS] Prerequisites SQL commands for applying the "Sequencer" table in the LinkDB CNSSEQ Table Activating ERP Number Generator Incorporate ERP number into the PARTdataManager Further number generations based on the example of the default setting Adjust conditions for number generation
4.12. User-role concept
4.12.1. Create users Create database user by database internal administration Create database users in database via access from PARTadmin Create users on the side of PARTsolutions via PARTadmin (dialog User-Role assignment) / plinkusers.cfg -> Block <user name> Create database user on the side of PARTsolutions via PARTadmin (dialog "Database user") Role sequence in the dialog box "Select role" / plinkusers.cfg -> Block [<role_name>] -> Key "GROUPORDER"
4.12.2. Create and configure roles Tabbed page "General" Dialog box for role selection - plinkgroups.cfg -> Block [Role name] -> Keys "DESC" and "IMAGE" Preferred ranges - plinkgroups.cfg -> Block [Role_name] -> Key "PREFRANGE" Display condition for parts selection - Colored catalog index - plinkgroups.cfg -> Block [Role_name] -> Key "CONDITIONTREE" Viewing condition for table rows - plinkgroups.cfg -> Block [Role_name] -> Key "TABRESTRICTION" Show table row but hide LinkDB content - plinkgroups.cfg -> [Role_name] -> Key "CONDITION" Columns to be displayed - plinkgroups.cfg -> Block [Role_name] -> Key "VARSUSED / VARSHIDDEN" Export condition - plinkgroups.cfg -> Block [Role_name] -> Key "EXPORTRESTRICTION" Export information (tooltip) at status lights - plinkgroups.cfg -> Block [Role_name] -> Key "TOOLTIPTEXTEXPORTON" / "TOOLTIPTEXTEXPORTOFF" Release certain directories for export - plinkgroups.cfg -> Block [Role_name] -> Key "EXPPRJTAB" / plinktemplates.cfg Hide catalogs - plinkgroups.cfg -> Block [Role name] -> Key "HIDELIST" Tabbed page "PDM" Tabbed page "Display" Status indicating icons in table - plinkgroups.cfg -> Block [<Role_name>] - Key "BMPCONDITION0" Status colors for catalog index - plinkgroups.cfg -> Block [Role_name] -> Key "COLORCONDITIONTREE<number>" Request ERP number per e-mail Tabbed page "Translations"
4.12.3. User-Role assignment User-Role assignment / plinkusers.cfg -> [<role name>] -> Key "GROUPS" plinkcommon.cfg -> Block [Common] -> Key "CADENAS_PRESELECT_LINKDB_GROUP" - Role selection by environment variable
4.13. Manual data administration
4.13.1. Creation of ERP numbers Using PARTdataManager Without direct linkage to the ERP system Manual entry of ERP number Applying ERP numbers using an online gateway to the SAP system Using PARTlinkManager Enter ERP number with PARTlinkManager Import a project into LINKDB – Assign ERP number PARTdataCenter
4.13.2. Edit variant / Create variant in PARTlinkManager
4.13.3. Create variants in PARTdataManager
4.13.4. Editing LinkDB in PARTlinkManager Editing columns Edit row
4.13.5. Delete datasets
4.13.6. Edit/delete dataset using PARTdataManager
4.14. Complex workflows for data maintenance
4.14.1. Overview
4.14.2. Initial filling of the LinkDB / Article assignment Data export per CSV with an example from SAP Manual export Automated Export Complexity assessment
4.14.3. Updating data Online replication Cyclic replication Automated and cyclical update of data Direct online linkage of the LinkDB to the ERP-DB Configuration file nightupdate.cfg Block [LOG] Block [MISC] Block [LOAD] Block [ERPTABLE-IDENTIFY-COLUMNS] Block [ERPTABLE-UPDATE-COLUMNS]
4.14.4. New application of parts with ERP Gateway
4.14.5. Distributed Locations - LinkDB Replication
4.15. Index update
4.16. Catalog update with ERP integration
4.16.1. Catalog update Standard information
4.16.2. Standard check on problems with mapping LinkDB entries
4.16.3. Catalog update with ERP integration - Fix mapping problems with the Update manager Catalog update (Tutorial) - Example 1 Preparations Catalog update - Download Assignment / release – Overview on the best approaches PARTadmin - Check | Compare | Install PARTlinkManager - Important notes on procedure Update manager - Project assignment to LinkDB datasets Update manager - Assign projects after mapping automatically processed before Assign project.prj (Standard name adjusted) Assign project2.prj (Adjusted directory) Assign project4.prj (directory relocated and Standard name adjusted) Update manager - Assign projects without preceding mapping Assign project3.prj (project and Standard number renamed) Assign project5.prj (project and Standard number renamed and Standard name adjusted) Assign project6.prj and project7.prj Final check Catalog update (Tutorial) - Example 2 Preparation Status after update installation to Bikecompany V2 and before editing with Update Manager Editing in Update manager Install update version Update without connection to the LinkDB Correct version numbers Update structure table User interface of Update Manager Symbols in the Catalogs section Symbols in the Line mapping section Functions Active State and Requested State Changed standard name Moved dataset No correlation to the old dataset found Conduct assignments across lines Background information Configuration file plinkupdatemgr.cfg Block [WORKFLOW] Key "CUSTOMUPDATESCRIPT"
4.16.4. Catalog update with ERP integration - Check LinkDB mapping problems BEFORE installation (table and 3D view)
4.16.5. PARTsolutions with LinkDB - Troubleshooting at catalog updates Revising / Updating the LinkDB Manual revision via parameter calls
4.17. Further settings in plinkcommon.cfg
4.17.1. Enable automatic login / plinkcommon.cfg -> Block [Login] -> Key "AUTOLOGIN"
4.17.2. Try NT user authentication / plinkcommon.cfg -> Block [Login] -> Key "NTUSERAUTH"
4.17.3. Pinning Dimension attribute OnOff / plinkcommon.cfg -> Block [PARTdataManager] -> Key "LockDimRange" Background information
4.17.4. Login options / plinkcommon.cfg -> Block [PARTdataManager] -> Key "LoginMode"
4.17.5. PARTlinkManager: Line color at missing ERP_PDM_NUMBER / plinkcommon.cfg -> Block [COLORS]
4.17.6. E-mail settings / plinkcommon.cfg -> Block [MAIL]
4.17.7. Own template for Request ERP number per e-mail / plinkcommon.cfg -> Block [MAIL] -> Key "TEMPLATE"
4.17.8. ERP for single parts in assembly tables / plinkcommon.cfg -> Block [PARTdataManager] -> Key "UseErpForAssPart" Preparations in order to put the functionality into practice Loading the assembly in the PARTdataManager Assembly without ERP number Assembly with ERP numbers Scripting - further possibilities
4.17.9. Update full-text search index / plinkcommon.cfg -> Block [Common] -> Key "UPDATESEARCHINDEX"
4.17.10. Adjust Standard name - Standard name (short) - BOM name / plinkcommon.cfg -> Block [PARTdataManager] -> Keys "NB" "ShortNB" "LINA"
4.18. Translation file "plinkcommon.def"
4.19. Further settings in "plinkgroups.cfg"
4.19.1. E-mail settings for "new ident-no." dialog / plinkgroups.cfg -> Block [<Role_name>] -> Keys "SENDTO" "SUBJECT" "SERVER" "ISHTML"
4.19.2. Own template for Request ERP number per e-mail / plinkgroups.cfg -> Block [<Role_name>] -> Key "TEMPLATE"
4.19.3. Adjust Standard name - Standard name (short) - BOM name / plinkcommon.cfg -> Block [PARTdataManager] -> Keys "NB" "ShortNB" "LINA"
4.20. Translation file "plinkgroups.def"
4.21. Further settings in erpcustom.cfg
4.21.1. Load additional scripts - erpcustom.cfg -> Block [LOAD]
4.21.2. Default value for new "ACATIVE_STATE" values - erpcustom.cfg -> Block [VARS] -> Key "NEWASTATE"
4.22. Getting started - Demo database
4.22.1. Features
4.22.2. Subsequent installation of PLDBDEMO instance
4.22.3. ERP activation / deactivation
4.23. Troubleshooting
4.23.1. Link database troubleshooting Disabling Journaling on DB2/400 Database login - Error message
4.24. PARTadmin Reference
4.24.1. Menus File ? (Help)
4.24.2. Icons
4.24.3. ERP environment settings Idle time - Connect LinkDB Try NT user authentication Enable automatic login Define Database interface
4.24.4. "Roles" dialog - Buttons
4.24.5. "Roles" dialog - Tabbed pages Tabbed page "General" Tabbed page "PDM" Tabbed page "Display" Tabbed page "Mail" Tabbed page "Translations" Tabbed pages Standard name , Standard name (short) , BOM name Syntax Examples Change NB according to project Change NB via vbs scripting
4.25. PARTlinkManager reference
4.25.1. PARTlinkManager: Launch from Start menu License selection dialog box at Floating licensing
4.25.2. Launch PARTlinkManager from PARTdataManager
4.25.3. Authorization rights
4.25.4. Menus File Connect Connect as... Switch role Disconnect Export as -> CSV table Import Execute Script Exit View Show tree Display filtered tree Hide old versions of parts Extras Database Adding/removing database columns Apply databases columns per SQL Scripting Adding database column with PARTlinkManager Set column visible in PARTdataManager Removing database column Show database columns Save/restore database Editing additional tables in the PARTlinkManager Configure ERP environment Tabbed page "PARTlinkManager preferences" Set row color Group definitions / Set column color Adjust table values Modify column display Column position in PARTlinkManager Tabbed page "PARTdataManager preferences" Login mode e-mail notification Tabbed page "Database" Tabbed page "Export tables" Tabbed page "Translations" Tabbed pages "Standard name", "Standard name (short)", "BOM name" Preferences PARTlinkManager - Search fields Network Logging settings Catalog update - Update manager PARTadmin ? (Help)
4.25.5. Menu buttons
4.25.6. Buttons
4.25.7. Context menu Set fields Duplicate Edit variant Create variant Assign ERP numbers / delete Import project into database Edit project table Change standard descriptions according to project Explicitly specify sorting order of variants for PARTdataManager table Column sorting of geometry columns in PARTdataManager Update structure table
4.25.8. Filtering display
5. FAQ
5.1. Help
5.2. Context help...
5.3. Training documents
5.4. About
5.5. Licenses
5.5.1. License information "General" tabbed page "License selection" tabbed page "Expiring licenses" tabbed page "Active licenses" tabbed page "Checkout" tabbed page
5.5.2. Licensing "Request licenses online" index page for single workstation license "Request licenses online" index page with FLM license Entering licenses... (Single workstation) Entering licenses... (FLM) Check licenses... (Single workstation) Check licenses... (FLM) No valid license available
5.6. System info/Support
5.7. PARTconcept: Ticketing
5.8. Remote maintenance
5.9. Global Logging System
5.10. Adjust GUI - Overview
6. Appendix
6.1. Constants, Functions, Operators, mathematical expressions
6.1.1. Fortran Syntax
6.1.2. SQL Syntax
6.1.3. Constants
6.1.4. Operators
6.1.5. Functions
6.1.6. Examples Example 1 Example 2 Example 3 Example 4
6.2. Third Party License Information