powered by CADENAS

Manual

Manual

PARTsolutions / PARTcommunity4Enterprise - Administration Manual

CADENAS GmbH

Edition V9.08 SP1 ff., 01/2015

The text and illustrations have been prepared with great care. However, CADENAS GmbH, its authors and translators can assume neither legal responsibility nor any liability for any errors that may remain or consequences thereof. The information contained in this manual is provided without warranty and may be modified at any time without notice. CADENAS GmbH accepts no responsibility in this regard.

This manual is protected by copyright law. All rights reserved. The rights to the documentation are owned by CADENAS GmbH. No part of this book may be reproduced in any form by photocopying, microfilm or any other method or transmitted in a machine-readable language, particularly for print processing machines, without the written consent of CADENAS GmbH. Rights to transmission by radio and television or live presentation are also reserved.

Copyright 1992-2015 CADENAS GmbH. All rights reserved.

CADENAS, PARTsolutions, PARTdataManager, PARTshaft, PARTconnection, eCATALOGsolutions, PARTdesigner, PARTconfigurator, PARTdxfconverter, PARTlanguage, PARTident, PARTeditor, PARTproject, PARTmedia, Visual Configurator, PARTserver, PDMsolutions, PARTwarehouse, PARTdataCenter are trademarks of CADENAS GmbH, Augsburg. All further brand names, company names or product names are trademarks or registered trademarks of their rightful owners.

All information given without liability.


Germany
CADENAS GmbH Augsburg
Berliner Allee 28 b+c
86153 Augsburg
Phone: +49 / (0) 821 / 2 58 58 0-0
Fax: +49 / (0) 821 / 2 58 58 0-999
Hotline: +49 / (0) 821 / 2 58 58 20
License request (Fax): +49 / (0) 821 / 2 58 58 2-999
E-mail:
Internet: www.cadenas.de
Italy
CADENAS Italiana s.r.l.
Via Bassa Dei Sassi 1
I-40138 Bologna (BO)
Tel.: +39 - 051 - 0870755
Fax: +39 - 051 - 0419105
E-mail:
France
CADENAS France SARL
14 rue Philibert Collet
F-01400 Châtillon sur Charlaronne
Tel.: +33 (0)4 81 30 00 04
Fax: +33 (0) 4 74 55 26 96
Hotline: +49/ (0) 821 / 258 58 22 77
E-mail -support:
E-mail:
Spain
CADENAS Ibérica
C / Berruguete 90, bajos
E - 08035 Barcelona
Phone: +34 / 932 749 540
E-mail:
USA
PARTsolutions LLC. USA
200 Techne Center Dr., Suite 118
Milford, OH 45150 USA
Phone: +1 / (513) 453 - 04 53
Fax: +1 / (513) 453 - 04 60
E-mail:
E-mail-support:
Internet: www.part-solutions.com
Korea
CADENAS Korea
Donga Venture Tower, 907
305-301 Bongmyung-dong,
Yusong-gu, Deajeon, Korea-Süd
Phone: +82 / 505 / 936 - 93 60
E-mail:
Japan
CADENAS web2cad INC. Japan
8-4-1, Toshima, Kita-ku
Tokyo 114-0024, Japan
Phone: +81-3-59 61 - 50 31
Fax: +81-3-59 61 - 50 32
E-mail:
China
CADENAS GmbH Shanghai
CADENAS GmbH Shanghai Rep. Office
Nr. 885 the People Road
Huaihai Zhonghua Building, 603 Room
200010 Shanghai
People's Republic of China
Phone: +86 / (0) 21 / 63551318
Fax: +86 / (0) 21 / 63551319
E-mail:

Table of Contents

Preface
1. PARTsolutions Administration / PARTadmin
1.1. PARTadmin
1.1.1. Changes to PARTsolutions Version 9
1.1.2. Launch
1.1.2.1. Client authorization rights
1.1.3. Assembly and function
1.1.4. PARTsolutions
1.1.4.1. Language selection
1.1.4.2. Installed modules
1.1.4.3. Catalog update
1.1.4.3.1. Catalog update Online
1.1.4.3.1.1. Launch
1.1.4.3.1.2. Welcome tabbed page
1.1.4.3.1.3. Catalog update tabbed page
1.1.4.3.1.4. Download tabbed page
1.1.4.3.1.5. PARTupdate - Notification
1.1.4.3.2. Before the catalog installation Check and Compare
1.1.4.3.2.1. Versions
1.1.4.3.3. Offline Catalog installation / Catalog update
1.1.4.3.3.1. Alternative options for catalog installation
1.1.4.3.4. Migration
1.1.4.3.4.1. Structure of the dialog and meaning of symbols
1.1.4.3.4.2. Conversion of the Geometry Index from V9 to V9v2
1.1.4.3.5. PARTsolutions with LinkDB - Troubleshooting at catalog updates
1.1.4.3.5.1. Revising / Updating the LinkDB
1.1.4.3.5.1.1. Per Parameter calls
1.1.4.4. Index administration
1.1.4.4.1. Function overview
1.1.4.4.2. Important innovations with V9
1.1.4.4.3. Overview of user interface
1.1.4.4.4. Symbols and displays in the index tree
1.1.4.4.5. Commands
1.1.4.4.5.1. Generate new search index
1.1.4.4.5.2. Update search index
1.1.4.4.5.3. Cleanup versions
1.1.4.4.5.4. Import geometry data
1.1.4.4.6. Context menus
1.1.4.4.6.1. Overview of context menu commands
1.1.4.4.6.2. Context menu commands in detail
1.1.4.4.6.2.1. Matrix: Software and Lucene index version
1.1.4.4.6.2.2. Manage fingerprints
1.1.4.4.7. Index administration at the client computer and/or in user mode
1.1.4.4.7.1. Display in user mode
1.1.4.4.7.2. Restricted configuration options and commands
1.1.4.4.8. Index administration - Background information
1.1.4.5. CAD integration administration
1.1.4.6. ERP environment
1.1.4.6.1. Define Database interface
1.1.4.7. Material
1.1.4.8. Document types
1.1.5. eCATALOGsolutions
1.1.6. Translations
1.1.7. Configuration files
1.1.7.1. Edit configurations files
1.1.7.2. Configuration files user interface
1.1.7.3. Configuration files functions
1.1.7.3.1. Search key
1.1.7.3.2. Display short information
1.1.7.3.3. Change key values
1.1.7.3.4. Edit configuration entry
1.1.7.3.5. Edit blocks and keys
1.1.7.3.5.1. Additional functions for $CADEANS_DEFAULTUSER
1.1.7.4. $CAEDENAS_DATA/datasetup
1.1.7.4.1. avoid_parts.cfg
1.1.7.4.2. classsystem.cfg
1.1.7.4.2.1. Limit classification to projects, directories, catalogs
1.1.7.4.3. replace_std.cfg
1.1.7.4.3.1. General settings
1.1.7.4.3.2. Settings on project level
1.1.7.4.3.3. Settings on directory level
1.1.7.5. $CADENAS_DEFAULTUSER
1.1.7.5.1. Overview
1.1.7.5.2. partconnection.cfg
1.1.7.5.3. partsolu.cfg
1.1.7.5.3.1. Suppress note at missing search indexes
1.1.7.5.3.2. Language settings
1.1.7.5.3.3. Proxy settings
1.1.7.5.3.4. User mode
1.1.7.5.4. pdatamgr.cfg
1.1.7.5.4.1. Tabular Compare - Display geometric similarity
1.1.7.5.4.2. Symbol view - Adjust minimal and maximal tile size
1.1.7.5.4.3. Set buttons in search result list visible or hidden via configuration file
1.1.7.5.4.4. Search results: Show line preview images
1.1.7.5.4.5. Configure mode for part recalculation
1.1.7.5.4.6. Display filtered tree on/off
1.1.7.5.4.7. Change title in 3D view
1.1.7.5.4.8. Nominal thread and/or Core diameter im PARTdataManager
1.1.7.5.5. prjdependendy.cfg
1.1.7.5.6. psolopt.cfg
1.1.7.5.6.1. "SettingsSearch" section - Main settings for searching
1.1.7.5.6.1.1. Search results: Extend minimum similarity at geometric search successively
1.1.7.5.6.2. "SettingsIndexTree" section - Settings for part selection
1.1.7.5.6.2.1. Suppress regeneration of missing topology data
1.1.7.5.6.2.2. Symbol view: Old or new one?
1.1.7.5.6.2.3. Search result - Clickable variables and values
1.1.7.5.6.2.4. Search result filtered - Control of message
1.1.7.5.6.2.5. Search results: Placement number
1.1.7.5.6.2.6. Suchergebnisse: Popup-Fenster
1.1.7.5.6.2.7. Detaillierte Informationsansicht (unten)
1.1.7.5.6.2.8. Dialogfenster "Verweise" anpassen
1.1.7.5.6.2.9. Änderungshistorie von Installation history an-/ausschalten
1.1.7.5.6.2.10. Vorschaubilder und Tooltipbild - Größe definieren
1.1.7.5.6.3. Part comparison - Enlarged preview image in the tooltip
1.1.7.5.6.4. TagCloud
1.1.7.5.6.5. Hide search options tabbed page
1.1.7.5.6.6. Synonym editor
1.1.7.5.6.7. Geometric Search
1.1.7.5.6.7.1. Tabular comparison on/off
1.1.7.5.6.7.2. Edit search template mode
1.1.7.5.6.7.3. Start external viewer
1.1.7.5.6.7.4. Toolbar icons
1.1.7.5.6.7.5. Tooltips on/off
1.1.7.5.6.8. Table settings
1.1.7.5.6.8.1. Preferred ranges
1.1.7.5.6.8.2. Hide columns
1.1.7.5.7. seamless.cfg
1.1.7.5.7.1. Call up PARTadmin
1.1.7.5.7.2. Hide Catalogue filter
1.1.7.5.7.3. Search in / for show/hide
1.1.7.5.7.4. Adjust sequence and visibility of tabs
1.1.7.5.7.5. Seamless - Part comparison | Right-left setting
1.1.7.5.8. startuppage.cfg
1.1.7.5.9. switchwindowsettings.cfg
1.1.7.5.10. varsearch.cfg
1.1.7.5.10.1. Full text search: Priority setting of the fields to search
1.1.7.5.10.2. Hide search fields [TopSearchPane]
1.1.7.5.11. windowsettings_....cfg
1.1.7.5.11.1. Basic settings
1.1.7.5.11.2. Definition of window distribution in the PARTdataManager
1.1.7.5.11.3. Examples
1.1.7.6. $CADENAS_SETUP
1.1.7.6.1. catalogicons.cfg - Icons on catalog preview image
1.1.7.6.2. 2dscales.cfg
1.1.7.6.3. Bug report
1.1.7.6.4. cfginfo.cfg
1.1.7.6.5. class_mod.cfg - Name-mapping of published elements
1.1.7.6.6. dbproxy.cfg
1.1.7.6.7. din962_global.cfg
1.1.7.6.8. erpcustom.cfg
1.1.7.6.8.1. BLOCK: VARS
1.1.7.6.8.1.1. Key: SENDTO, SENDFROM, SUBJECT, SERVER
1.1.7.6.8.1.2. Key: NEWASTATE
1.1.7.6.8.1.3. Key: TIMESTAMPNR
1.1.7.6.8.1.4. Key: USERDIALOG_ERPNR
1.1.7.6.8.2. BLOCK: USERDIALOG
1.1.7.6.8.3. BLOCK: ADDTODB
1.1.7.6.8.4. BLOCK: LOAD
1.1.7.6.8.4.1. Automatic generation of ERP number + export dialog for material selection
1.1.7.6.9. filesystems.cfg
1.1.7.6.9.1. Caching index files of $CADENAS_DATA on Search server
1.1.7.6.10. geomsearch.cfg
1.1.7.6.10.1. Geometry import
1.1.7.6.10.2. Cache search results in working memory
1.1.7.6.10.2.1. Caching for versions up to 9.07
1.1.7.6.10.2.1.1. Description of different caches
1.1.7.6.10.2.1.2. Log file evaluation - Find best settings
1.1.7.6.10.2.2. Caching for Versions as of 9.08 / New Geometric Search Index
1.1.7.6.10.2.2.1. New structure of indices
1.1.7.6.10.2.2.2. General settings
1.1.7.6.10.2.2.3. Migration of indices
1.1.7.6.10.2.2.4. Creation of Geo and Topo indices
1.1.7.6.10.2.2.5. Changes at the actual search
1.1.7.6.10.2.2.6. Caching settings
1.1.7.6.10.2.2.7. Log file evaluation - Find best settings
1.1.7.6.10.2.2.8. Access on Topology values via VBS
1.1.7.6.11. if<cadname>.cfg
1.1.7.6.12. material.cfg (without ERP integration)
1.1.7.6.13. material_assign.cfg (with ERP integration)
1.1.7.6.14. nightupdate.cfg
1.1.7.6.15. online_translators.cfg
1.1.7.6.15.1. Use online translation services directly from PARTproject
1.1.7.6.15.2. Configuration of the Online Translation Services
1.1.7.6.15.2.1. Integration mode of translation service
1.1.7.6.15.2.2. Structure of configuration file
1.1.7.6.15.2.3. Google Translator - Create account
1.1.7.6.15.2.4. Microsoft Translator - Create account
1.1.7.6.16. partconnection.cfg
1.1.7.6.17. partsol.cfg
1.1.7.6.17.1. Block "PARTupdate"
1.1.7.6.17.1.1. PARTadmin Online-Catalog update: Show only specified catalogs
1.1.7.6.17.2. "Common" section - Common settings
1.1.7.6.17.2.1. Geometry import
1.1.7.6.17.2.2. Proxy settings
1.1.7.6.17.2.3. Export subassembly structure to CAD (9.04)
1.1.7.6.17.3. "PARTdataManager" section - Global settings for PARTdataManager
1.1.7.6.17.3.1. Restrict Search results via Catalogue filter
1.1.7.6.17.3.2. Search results: "Search settings" button
1.1.7.6.17.3.3. Show/hide selection options in search path/template list box
1.1.7.6.17.3.4. Show/hide synonym search and LinkDB search checkboxes
1.1.7.6.17.3.5. Show/hide 2D sketcher
1.1.7.6.17.4. Full text search: Prioritize catalogs
1.1.7.6.17.5. Pool and project directory for native parts
1.1.7.6.17.6. PARTcadAssistant
1.1.7.6.17.7. Catalog update
1.1.7.6.17.8. Communication between applications
1.1.7.6.17.9. Material mapping
1.1.7.6.18. pdbconmgr.cfg
1.1.7.6.19. pdetailopt.cfg
1.1.7.6.19.1. Workflows
1.1.7.6.19.2. pdetailopt.cfg - Settings
1.1.7.6.19.2.1. Block MAIN
1.1.7.6.19.2.2. Block CONFIGNAMES
1.1.7.6.19.2.3. CATALOGS, DIRECTORIES, PROJECTS Blocks
1.1.7.6.19.2.4. Tabulation
1.1.7.6.19.2.5. Export of neutral formats and 2D derivation
1.1.7.6.20. plinkcommon.cfg
1.1.7.6.20.1. General
1.1.7.6.20.2. Block: Common
1.1.7.6.20.2.1. Key: CADENAS_PRESELECT_LINKDB_GROUP
1.1.7.6.20.2.2. Key: NBMODULE
1.1.7.6.20.2.3. Key: VBSCUSTOM
1.1.7.6.20.2.4. Key: PRJTABLE
1.1.7.6.20.2.5. Key: EXPPRJTABLES
1.1.7.6.20.3. Block: VARNAME_MAPPING
1.1.7.6.20.3.1. Key: ERP_PDM_NUMBER
1.1.7.6.20.4. Block: PARTdataManager
1.1.7.6.20.4.1. Searching LinkDB - Case sensitive on/off
1.1.7.6.20.4.2. Key: LockDimRange
1.1.7.6.20.4.2.1. Explanations
1.1.7.6.20.4.3. KEy: KeepOrgRow
1.1.7.6.20.4.4. Key: UseErpForAssPart
1.1.7.6.21. plinkcommon.def
1.1.7.6.22. plinkgroups.cfg
1.1.7.6.23. plinkgroups.def
1.1.7.6.24. plinktemplates.cfg
1.1.7.6.25. plinkusers.cfg
1.1.7.7. $CADENAS_USER
1.1.7.7.1. partsolu.cfg
1.1.7.7.2. partupdate.cfg
1.1.7.7.3. pdatamgr.cfg
1.1.7.7.4. prjdependendy.cfg
1.1.7.7.5. psolopt.cfg
1.1.7.7.6. reports.cfg
1.1.7.7.6.1. Reports - Visible for all?
1.1.7.7.6.2. Duplicate report - Comparison on project level
1.1.7.7.7. reports.xml - Storage location of reports
1.1.7.8. Optimize user interface
1.1.7.8.1. Adjust menus, menu items, toolbars, icons, context menu commands
1.1.7.8.1.1. Call up logic
1.1.7.8.1.2. Tweak commands
1.1.7.8.1.2.1. Create menu
1.1.7.8.1.2.2. Create menu items
1.1.7.8.1.2.3. Deleting menus
1.1.7.8.1.2.4. Deleting sub-points from menus
1.1.7.8.1.2.5. Deleting context menu commands
1.1.7.8.1.2.6. Create toolbar
1.1.7.8.1.2.7. Create toolbar icons
1.1.7.8.1.2.8. Deleting toolbars
1.1.7.8.1.2.9. Deleting icons
1.1.7.8.1.2.10. Set external and internal links
1.1.7.8.1.3. Tweak parameters in detail
1.1.7.8.1.3.1. Tweak parameters for toolbars and icons
1.1.7.8.1.3.1.1. Tweak parameters for toolbar "Views" and icons
1.1.7.8.1.3.1.2. Tweak parameters for toolbar "Export" and icons
1.1.7.8.1.3.1.3. Tweak parameters for toolbar "Default" and icons
1.1.7.8.1.3.1.4. Tweak parameters for toolbar "Assembly" and icons
1.1.7.8.1.3.1.5. Tweak parameters for toolbar "Details" (LOD) and icons
1.1.7.8.1.3.1.6. Tweak parameters for toolbar "View modes" and icons
1.1.7.8.1.3.1.7. Tweak parameters for icons of the toolbar "ERP"/("Link database")
1.1.7.8.1.3.1.8. Tweak parameters for toolbar "Online search"
1.1.7.8.1.3.2. Tweak parameters for menus and menu items
1.1.7.8.1.3.2.1. Tweak parameters for menu "File" and menu items
1.1.7.8.1.3.2.2. Tweak parameters for menu "Export" and menu items
1.1.7.8.1.3.2.3. Tweak parameters for menu "View" and menu items
1.1.7.8.1.3.2.4. Tweak parameters for menu "Table" and menu items
1.1.7.8.1.3.2.5. Tweak parameters for menu "Configurator" and menu items
1.1.7.8.1.3.2.6. Tweak parameters for menu "Extras" and menu items
1.1.7.8.1.3.2.7. Tweak parameters for menu "Window" and menu items
1.1.7.8.1.3.2.8. Tweak parameter for menu "?" and menu items
1.1.7.8.1.3.2.9. Tweak parameters for menu "ERP" and menu items
1.1.7.8.1.3.3. Tweak parameters for context menu commands
1.1.7.8.2. Activate/deactivate windows
1.1.7.8.3. Define windows positioning
1.1.7.8.4. Show/hide search methods
1.1.8. License administration
1.1.8.1. Open License administration
1.1.8.2. License Types
1.1.8.3. Clients
1.1.8.3.1. "General" tabbed page
1.1.8.3.1.1. Hostid sources
1.1.8.3.1.2. Use FLM server
1.1.8.3.2. "Licenses" tabbed page (Single workstation)
1.1.8.3.2.1. Entering licenses... (Single workstation)
1.1.8.3.2.2. Check licenses... (Single workstation)
1.1.8.3.3. "Protocol" tabbed page
1.1.8.3.4. "License product preselection" tabbed page
1.1.8.3.5. "Request licenses online" tabbed page
1.1.8.4. FLM server
1.1.8.4.1. Innovations as of V9.03
1.1.8.4.2. Precondition for the usage of floating licenses
1.1.8.4.3. FLM-Server - V9.03 + V8.1 - Different scenarios
1.1.8.4.4. "Connected servers" dialog area
1.1.8.4.5. "Licenses" tabbed page (FLM)
1.1.8.4.5.1. Entering licenses... (FLM)
1.1.8.4.5.2. Check licenses... (FLM)
1.1.8.4.6. "Dynamic Nodelocked" tabbed page
1.1.8.4.7. "Checkouts" tabbed page
1.1.8.4.8. "Access control" tabbed page
1.1.8.4.9. "Events" tabbed page
1.1.8.4.10. "Security" tabbed page
1.1.8.4.11. "Protocol" tabbed page
1.1.8.4.12. "Status" tabbed page
1.1.8.4.13. "Statistic" tabbed page
1.1.8.4.14. "Request licenses online" tabbed page
1.1.9. PARTsynonym
1.2. More administrative setting options
1.2.1. Request parts via e-mail - Part information (Mident) attached as ".psmid" file (9.03)
1.2.2. Connections
1.2.2.1. Connections (9.05, 9.03 SP3)
1.2.2.1.1. General information
1.2.2.1.2. Basic settings
1.2.2.1.3. Execute script
1.2.2.2. Connections: Always show holes (also without ERP integration) when "preferred rows" and "filtered tree" is on (9.03)
1.2.3. Batchconvert.exe
1.2.4. Replace_std.cfg - Adjust paths after V9 update
1.2.5. Define search template
1.2.5.1. Search templates
1.2.5.2. Algorithms
1.2.5.2.1. Display algorithms in PARTdataManager
1.2.5.3. Other settings
1.2.5.4. Background information
1.2.5.4.1. Indexes
1.2.5.4.2. Index files
1.3. Logging
1.3.1. Global Logging System
1.3.2. Logging Viewer (9.03 SP2)
1.3.3. Crash dump (9.03 SP2)
2. PARTsolutions - CAD Integration - Administration
2.1. User interface in PARTadmin
2.1.1. User interface for Category "CAD integration"
2.1.1.1. Structure of the GUI
2.1.1.2. "Simple" tab page
2.1.1.3. Mode: "Simple" or "Expanded"
2.1.2. User interface for Category "Configuration files"
2.2. CAD encompassing information
2.2.1. Syntax and concepts
2.2.1.1. Simplified syntax
2.2.1.2. What are categories?
2.2.1.3. Apply and use own categories
2.2.1.4. Variable values - functions
2.2.1.5. Interpretation of similar blocks with and without category
2.2.1.6. Join blocks
2.2.1.7. Configuring PARTsolutions interface menu and toolbar
2.2.1.8. Passwörter verschlüsselt in Konfigurationsdatei einsetzen (9.04)
2.2.1.9. Use macros
2.2.2. Set file name ("FileName" key) and pool path ("poolpath" key)
2.2.2.1. Pool: flat or with subdirectories ("poolpath" key)
2.2.2.2. File name: set generation options ("FileName" key)
2.2.2.3. Reuse the V8.1 pools after migration to V9
2.2.2.3.1. File name with reuse of V8.1 pool
2.2.2.3.2. Pool path for standard parts with reuse of v8.1 pool
2.2.3. Intelligent placement for standard parts
2.2.4. Attribute mapping
2.2.4.1. User interface
2.2.4.2. Structure of "Common attribute settings" tab page
2.2.4.3. Value types
2.2.4.4. Examples
2.2.4.4.1. Attribute mapping restricted to a special project
2.2.4.4.2. Specify user defined attributes via categories
2.2.4.4.3. Export standard attributes in several languages
2.2.5. Material mapping
2.2.5.1. Material column without ERP integration
2.2.5.2. Material column with ERP integration
2.2.6. Transfer attributes via CNS classification
2.2.7. General configuration file "ifacecommon.cfg"
2.2.7.1. NoSection
2.3. CAD specific information
2.3.1. AutoCAD Integration - Administration
2.3.1.1. Installation of AutoCAD 2014 interface
2.3.1.2. Configuration
2.3.1.2.1. "Layer" and "Shape" configuration
2.3.1.2.1.1. "Layer" configuration
2.3.1.2.1.1.1. Overview on all specified layers of the configuration file
2.3.1.2.1.1.2. Structure on a single "Layer" block
2.3.1.2.1.1.3. Example
2.3.1.2.1.2. "Shape" Configuration
2.3.1.2.1.2.1. Overview on all blocks in the configuration file
2.3.1.2.1.2.2. Structure of a single "Shape" block
2.3.1.2.1.2.3. Example
2.3.1.2.2. IgnoreCheckinAttributes
2.3.1.2.3. "Simple" tabbed page
2.3.1.2.4. Attribute location
2.3.1.2.5. Enhanced options - Layer and line settings
2.3.1.2.6. Attribute mapping in AutoCAD
2.3.1.2.6.1. Tabbed page "AttributeMapping(2D)"
2.3.1.2.6.1.1. Declare prefix for standard attributes
2.3.1.2.6.2. Tabbed page "BomNormalAttributes"
2.3.1.2.6.2.1. Adjust BOM list attributes
2.3.1.2.6.3. AttributeMapping(Native) and BomNativeAttributes
2.3.1.2.6.4. Transfer custom attributes
2.3.1.3. Troubleshooting
2.3.1.3.1. Installation - Deinstallation
2.3.1.3.1.1. Version 2007 to 2008
2.3.1.3.1.2. As of version 2009
2.3.1.4. User documentation
2.3.2. CoCreate Modeling Integration - Administration
2.3.2.1. Configuration
2.3.2.1.1. NoSection
2.3.2.1.2. PositionDialog - Placement method
2.3.2.1.3. denied_char
2.3.2.1.4. replace_char - replacement of characters
2.3.2.2. CoCreate Modeling Installation
2.3.2.3. Modelmanager - Configuration
2.3.2.4. Update information
2.3.2.5. Trouble shooting
2.3.2.5.1. Installation
2.3.2.6. User documentation
2.3.3. Inventor Integration - Administration
2.3.3.1. Configuration
2.3.3.1.1. Tabbed page "Simple"
2.3.3.1.2. PARTsolutions pool path
2.3.3.1.3. Adjust templates
2.3.3.1.4. NoSection
2.3.3.1.5. CreateDerivated(is3dPart) or (is3dasm)
2.3.3.1.6. CreateIMates
2.3.3.2. Attribute mapping in Inventor
2.3.3.2.1. Tabbed page "AttributeMapping(3D)"
2.3.3.2.1.1. Declare prefix for PARTsolutions attribute
2.3.3.2.2. Transfer custom attributes
2.3.3.2.3. Tabbed page "DocumentInformation"
2.3.3.2.4. Tabbed page "SummaryInformation"
2.3.3.2.5. Tabbed page "DesignTracking"
2.3.3.3. Several Inventor versions in parallel operation
2.3.3.4. Troubleshooting
2.3.3.4.1. Installation - Deinstallation
2.3.3.5. User documentation
2.3.4. NX Integration - Administration
2.3.4.1. Configuration
2.3.4.1.1. NoSection
2.3.4.1.2. NX - Different modes at Native Checkin
2.3.4.1.3. Add categories to attribute mapping
2.3.4.1.4. NX: Routing function
2.3.4.2. NX9 - Ribbon menu by default
2.3.4.3. Troubleshooting
2.3.4.3.1. Installation - Deinstallation
2.3.4.4. User documentation
2.3.5. Creo / PRO-Engineer Integration - Administration
2.3.5.1. Configuration
2.3.5.1.1. "Simple" tabbed page
2.3.5.1.2. OverrideDefaultLayer
2.3.5.1.3. PoolPath
2.3.5.1.4. Automatic accuracy search
2.3.5.1.5. TempAxisLayer
2.3.5.1.6. TemplateSkeletonName
2.3.5.1.7. CopyNativeFiles
2.3.5.2. Attribute mapping in Creo / ProEngineer
2.3.5.2.1. Tabbed page "AttributeMapping(3D)"
2.3.5.2.2. Transfer custom attributes
2.3.5.2.2.1. User defined attributes with type declaration
2.3.5.2.2.2. Adding new keys
2.3.5.3. Material mapping in Creo/ProEngineer
2.3.5.4. Activating the PARTsolutions interface in Pro/E
2.3.5.5. User documentation
2.3.6. Solid Edge Integration - Administration
2.3.6.1. Configuration
2.3.6.1.1. "Simple" tabbed page
2.3.6.1.2. NoSection
2.3.6.2. Attribute mapping in Solid Edge
2.3.6.2.1. Tabbed page "AttributeMapping(3D)"
2.3.6.2.2. Tabbed page "Custom" - Transfer custom attributes
2.3.6.2.2.1. Add more user-defined attributes
2.3.6.2.3. Tabbed page "ProjectInformation"
2.3.6.2.4. Tabbed pages "SummaryInformation" and "DocumentSummaryInformation"
2.3.6.2.5. Fill more fields in Solid Edge with PARTsolutions attributes
2.3.6.2.5.1. Field names in Solid Edge
2.3.6.2.6. Set different languages for attributes
2.3.6.3. Several Solid Edge versions in parallel operation
2.3.6.4. Troubleshooting
2.3.6.4.1. Installation - Deinstallation
2.3.6.5. User documentation
2.3.7. SolidWorks Integration - Administration
2.3.7.1. Configuration
2.3.7.1.1. Tabbed page "Simple"
2.3.7.1.2. Adjust templates
2.3.7.1.3. NoSection
2.3.7.2. Attribute mapping in SolidWorks
2.3.7.2.1. Tabbed page "AttributeMapping(3D)"
2.3.7.2.1.1. Declare prefix for PARTsolutions attributes
2.3.7.2.2. Tabbed page "CadDocumentAttributes" - Transfer custom attributes
2.3.7.2.2.1. Add further Extra attributes
2.3.7.2.3. Tabbed page "SummaryInformation"
2.3.7.3. Several SolidWorks versions in parallel operation
2.3.7.4. Troubleshooting
2.3.7.4.1. Installation - Deinstallation
2.3.7.5. User documentation
2.3.8. SpaceClaim - Administration
3. PARTsolutions - PDM Integration
3.1. General Information
3.1.1. ERP/PDM as leading systems
3.1.2. Basic workflow for "direct" PDM linking
3.1.3. Comparison: "pool integration" - total integration
3.1.4. Show CAD documents (PDM-ID) in PARTdataManager
3.1.5. Write a log file
3.2. General Configuration
3.2.1. Control
3.2.2. Activating the interface
3.2.2.1. if<pdmname>.cfg
3.2.3. Configuration - General hints
3.3. PDM specific information and configuration
3.3.1. Agile - Inventor
3.3.1.1. Preconditions
3.3.1.2. Installation
3.3.1.3. Interface activation within PARTsolutions
3.3.1.4. Basic settings
3.3.1.5. Generation options
3.3.1.6. Attribute mapping
3.3.2. CIM DATABASE - ProE/Creo
3.3.2.1. How does the PDM integration work?
3.3.2.2. Installation
3.3.2.3. Activate PDM interface
3.3.2.4. Display of material numbers in PARTsolutions
3.3.2.4.1. Create database column in the PARTsolutions LinkDB
3.3.2.4.2. Display additional column
3.3.2.4.3. State column name in the interface configuration
3.3.2.5. Automated creation of material numbers
3.3.3. CIM DATABASE - UGNX
3.3.3.1. How does the PDM integration work?
3.3.3.2. Installation
3.3.3.3. Activate PDM interface
3.3.3.4. Display of material numbers in PARTsolutions
3.3.3.4.1. Create database column in the PARTsolutions LinkDB
3.3.3.4.2. Display additional column
3.3.3.4.3. State column name in the interface configuration
3.3.3.5. Automated creation of material numbers
3.3.4. Insight - Solid Edge
3.3.4.1. Solid Edge <-> Insight - Installation
3.3.4.2. Write permission for document library
3.3.4.3. Activation of interface
3.3.5. Model Manager for CoCreate Modelling
3.3.5.1. Activate PDM interface
3.3.5.2. Attribute mapping
3.3.6. PRO.FILE
3.3.6.1. How does the CAD <-> PARTsolutions <-> PRO.FILE connection work?
3.3.6.2. Requirements
3.3.6.3. Installation
3.3.6.4. Settings within PRO.FILE
3.3.6.5. Setting environment variables for CAD and PARTsolutions:
3.3.6.6. Configuration
3.3.6.7. Activate PDM interface
3.3.6.8. Attribute mapping
3.3.6.9. Checking the function in the CAD system
3.3.7. SAP PLM for NX
3.3.7.1. System requirements
3.3.7.2. PARTsolutions interface configuration
3.3.7.2.1. The keys in particular
3.3.7.2.2. Menu in the application
3.3.7.2.3. applications\ugs - Directory
3.3.7.3. PLM++CADENAS – Menu functions
3.3.7.4. Processes of the PARTsolutions integration
3.3.8. SAP MM und PLM for SolidWorks, Solid Edge, Inventor, Pro/E
3.3.8.1. Installation
3.3.8.2. How does the SAP integration work?
3.3.8.3. Functions
3.3.8.4. New generation of DIS and Material
3.3.8.5. New generation of DIS and Material - Examples
3.3.8.6. Change, view, search material
3.3.8.7. Technical prerequisites
3.3.8.8. Installation
3.3.8.9. Program files
3.3.8.10. Integration file "sapcadenassrv.exe"
3.3.8.11. Customizing the PARTsolutions ERP interface
3.3.8.11.1. Principle of function
3.3.8.11.2. Activation of the PARTsolutions ERP interface
3.3.8.11.3. Customizing the PARTsolutions ERP interface
3.3.9. SolidWorks Enterprise PDM Integration
3.3.9.1. How does the SolidWorks Enterprise PDM integration work?
3.3.9.2. Requirements
3.3.9.3. Installation
3.3.9.4. Settings and integration activation
3.3.9.4.1. PLM section
3.3.9.4.2. PDMDocumentAttributes section
3.3.9.4.3. MAIN section
3.3.9.4.4. CHECKIN section
3.3.9.4.5. WORKFLOW Block
3.3.9.4.6. SERIALNUMBER Block
3.3.9.5. Check function in CAD system
3.3.10. Teamcenter
3.3.10.1. Teamcenter - Inventor
3.3.10.2. Teamcenter - Solid Edge
3.3.10.3. Teamcenter - NX
3.3.10.4. Teamcenter - Pro/E / Creo
3.3.10.5. Teamcenter additional functions (teamcenter_public_api.vbb)
3.3.11. Vault - Inventor
3.3.11.1. How does the Vault integration work?
3.3.11.2. Requirements
3.3.11.3. Installation
3.3.11.4. Settings inside Vault
3.3.11.5. Settings of Inventor projects
3.3.11.6. Configuration within PARTsolutions
3.3.11.7. Activation of the interface inside PARTsolutions
3.3.11.8. Check function in the CAD system
3.3.11.9. Error search
3.3.12. Windchill PDMLink - ProE/Creo
3.3.12.1. How does the PDMLink linking work?
3.3.12.2. Prerequisites and Specifics
3.3.12.3. Installation
3.3.12.4. Configuration
3.3.12.4.1. General
3.3.12.4.2. Windchill: Beliebige Zusatzdateien in den Workspace auschecken (9.04 SP1)
3.3.12.4.3. Attribute mapping
4. PARTcommunity4Enterprise - Administration
4.1. Architecture
4.2. Hardware and software requirements
4.2.1. Hardware
4.2.2. Software
4.2.3. Browser/Client
4.3. Installation steps
4.3.1. General notes
4.3.2. Install environment
4.3.2.1. Java Development Kit
4.3.2.2. Java advanced imaging
4.3.2.3. java2mzcom bridge
4.3.3. Database setup
4.3.3.1. PARTcommunity beans
4.3.3.2. Additional tables
4.3.4. PARTsolutions
4.3.5. Apache 2.2
4.3.5.1. Overview
4.3.5.2. 3. Specific installation steps
4.3.6. JBoss 4.0.3
4.3.6.1. JBoss Server
4.3.6.2. PARTcommunity
4.3.6.3. Specific installation steps
4.3.7. JKConnector
4.3.8. Launching PARTcommunity in the browser
4.3.9. zjv generation for 3D preview
4.3.10. PARTcommunityAdmin package
4.3.11. Customer sided layout changes
4.4. Layout specifications
4.5. Technical specifications
4.5.1. Portal type
4.5.1.1. A supplier specific portal (like Destaco, Misumi, Festo,…)
4.5.1.2. Multiple catalogs or OEM portals (such as Autodesk, Alibre, PTC)
4.5.2. General
4.5.2.1. Languages
4.5.2.2. User data for creating account
4.5.2.3. Contact
4.5.2.4. Activation e-mail
4.5.2.5. E-mail regarding portal crashes
4.5.2.6. Help
4.5.3. User Interface
4.5.3.1. Table
4.5.3.2. Tree
4.5.3.3. Previews
4.5.3.4. Parts generation / download
4.5.3.4.1. Selectable formats
4.5.3.4.2. Getting generated parts
4.5.3.4.3. Maximum download per day
4.5.3.5. Search
4.5.3.6. Individual fields
4.5.4. User rights
4.5.4.1. Create account
4.5.4.2. Select formats
4.5.4.3. Level of detail (LOD)
4.5.4.4. Select layer options
4.5.4.5. Part generation depending on available ticket
4.5.5. Additional Services
4.5.5.1. ERP
4.5.5.2. Advertising
4.5.5.3. Deep Links
4.5.5.3.1. What are deep links?
4.5.5.3.2. Syntax
4.5.5.3.3. Parameter
4.5.5.4. Use parts replacement configuration
4.5.5.5. Analysis
4.6. Configuration file
4.6.1. INITIALIZATION
4.6.2. CATALOG
4.6.3. COMMON
4.6.4. TABLE
4.6.5. IMAGE
4.6.6. ERP
4.6.7. BANNER
4.6.8. VIEWER
4.6.9. AUTOCREATE
4.6.10. Required user data
4.6.11. LOGIN
4.6.12. PREVIEW
4.6.13. PARTcommunity Administration
4.6.14. Search
4.6.15. Session expired
4.6.16. Frame settings
4.6.17. Services
4.6.18. Format settings
4.7. PARTstatistic
4.7.1. Installation
4.7.2. Export database
4.7.3. Starting
4.7.4. Classification of the user interface
4.7.5. Catalog selection
4.7.6. Statistic selection
4.7.7. Define Period
4.7.8. Set Filter
4.7.9. Save template
4.7.10. Export data
4.7.11. Create statistic
4.7.12. Analyze statistic
4.7.13. PARTstatistic: Create statistic via batch file
5. Strategic Parts Management
5.1. Introduction
5.1.1. Integration
5.1.2. Target groups
5.1.3. Entire workflow
5.1.4. Integrating LinkDB
5.1.4.1. Linkage
5.1.4.2. Data transfer and data link
5.1.4.2.1. Cyclical Replication
5.1.4.2.2. Online Replication
5.1.4.2.3. Direct Online linkage of LinkDB to ERP-DB
5.1.4.2.4. New installation of parts using an ERP Interface
5.1.5. User-role concept
5.1.6. Support of company-internal workflows
5.1.7. Modules
5.1.7.1. ERPsolutions/db lite
5.1.7.2. ERPsolutions/db standard
5.1.7.3. ERPsolutions/db professional
5.1.7.4. ERPsolutions/gateway SAP MM
5.1.7.5. ERPsolutions/gateway JDBC
5.1.7.6. ERPsolutions/attribute enhancement
5.1.7.7. PDMsolutions (optional)
5.1.7.8. SAP DVS / CAD desktop PDM/EDM interface (optional)
5.1.7.9. PARTsolutions/ident customizer
5.1.7.10. eCATALOGsolutions/reduction
5.2. Installation Link database
5.2.1. Hardware requirements
5.2.2. Database installation per PARTsolutions Setup
5.2.3. Manual database installation
5.2.3.1. Installations script
5.2.3.2. Basic functionality
5.2.3.3. Additional functionalities
5.2.4. Database connection via file DSN
5.2.5. ODBC driver
5.2.5.1. ODBC for MSSQL, Oracle
5.2.5.2. ODBC automatically installed
5.2.5.3. Set up ODBC manually
5.2.6. JDBC driver
5.2.6.1. Installation
5.2.6.2. Configuration
5.2.6.3. Jar files for other databases
5.2.7. Link database troubleshooting
5.2.7.1. Disabling Journaling on DB2/400
5.2.7.2. Database login - Error message
5.3. Getting started - Demo database
5.3.1. Features
5.3.2. Subsequent installation of PLDBDEMO instance
5.3.3. Deactivate ERP
5.4. PARTdataManager – ERP/PDM extensions
5.4.1. ERP toolbar
5.4.2. Enhanced search possibilities with ERP integration
5.4.2.1. Full-text search: Geometry and ERP values mixed
5.4.2.2. Full-text search in combination with Variables search
5.4.2.3. Use preferred rows filter
5.4.3. Database login…
5.4.4. User and role display in status bar
5.4.5. Classify project
5.4.6. Columns with colored background for ERP and PDM data
5.4.7. Hiding columns
5.4.8. Status colors for catalog index
5.4.9. Status indicating bitmaps for table view (Status light)
5.4.10. Additional information in directory tree
5.4.11. Request ERP number per e-mail
5.4.12. Display filtered tree
5.4.13. Sorting of search results
5.4.14. Line sorting in PARTdataManager
5.4.15. "Assembly" Window - Bill of material Window
5.4.15.1. Display mode
5.4.15.2. Choice of geometrically identical versions
5.4.15.3. Loading the single parts
5.4.16. Show CAD documents (PDM-ID) in PARTdataManager
5.5. ERP Integration
5.5.1. Overview
5.5.2. Prerequisites: Adjusting columns in the LinkDB
5.5.2.1. Apply columns per SQL-Scripting
5.5.2.2. Apply columns via PARTlinkManager
5.5.3. Initial Filling / Article Number Assignment
5.5.3.1. Data export per CSV with an example from SAP
5.5.3.1.1. Manual export
5.5.3.1.2. Automated Export
5.5.3.2. Complexity assessment
5.5.4. Updating data
5.5.4.1. Online replication
5.5.4.2. Cyclic replication
5.5.4.3. Direct online linkage of the LinkDB to the ERP-DB
5.5.5. New application of parts with ERP Gateway
5.5.6. Distributed Locations
5.5.6.1. Replicating the LINKDB
5.6. User-Role concept
5.6.1. Concept
5.6.2. Apply database users
5.6.2.1. User creation via database internal administration
5.6.2.2. Apply user via PARTadmin
5.6.3. Apply users in PARTsolutions
5.6.4. User-Role assignment
5.6.5. Defining roles
5.6.5.1. "Roles" dialog - Buttons
5.6.5.2. "Roles" dialog - Tabbed pages
5.6.5.2.1. Tabbed page "General"
5.6.5.2.2. Tabbed page "General" - Examples
5.6.5.2.3. Tabbed page "PDM"
5.6.5.2.4. Tabbed page "Display"
5.6.5.2.4.1. Status colors for catalog index
5.6.5.2.4.2. Status indicating bitmaps for table view (Status light)
5.6.5.2.4.2.1. Syntax example of a complex condition
5.6.5.2.5. Tabbed page "Menu"
5.6.5.2.5.1. Classify project
5.6.5.2.6. Tabbed page "Mail"
5.6.5.2.6.1. General notes
5.6.5.2.6.2. e-mail notification using PARTadmin
5.6.5.2.6.3. e-mail notification using PARTlinkManager
5.6.5.2.6.4. e-mail notification using enhanced ERP-functionality
5.6.5.2.7. Tabbed page "Translations"
5.6.5.2.8. Tabbed pages "Standard name", "Standard name (short)" and "BOM name"
5.6.6. Licenses
5.7. Configure ERP environment
5.7.1. Save/restore database
5.7.2. Database login - Error message
5.7.3. Adding/removing database columns
5.7.3.1. Adding database column
5.7.3.2. Removing database column
5.7.4. Naming rules for CAD file names
5.7.4.1. Name creation - Standard
5.7.4.2. Examples
5.7.4.3. Change NB according to project
5.7.4.4. Change NB via vbs scripting
5.7.5. Change dialogs in windows
5.7.6. Sorting rows in the PARTdataManager
5.7.7. "Assembly" window with ERP functionality - Example
5.7.7.1. Preparations
5.7.7.2. Loading the assembly in the PARTdataManager
5.7.7.2.1. Assembly without ERP number
5.7.7.2.2. Assembly with ERP numbers
5.7.7.3. Scripting - further possibilities
5.8. Data administration
5.8.1. Launch PARTlinkManager using PARTdataManager
5.8.2. Display filtered datasets
5.8.3. Catalog update
5.8.4. Catalog update with ERP integration - Update manager
5.8.4.1. Catalog update - Example 1
5.8.4.1.1. Preparations
5.8.4.1.2. Catalog update - Download
5.8.4.1.3. Assignment / release – Overview on the best approaches
5.8.4.1.4. PARTadmin - Check | Compare | Install
5.8.4.1.5. PARTlinkManager - Important notes on procedure
5.8.4.1.6. Update manager - Project assignment to LinkDB datasets
5.8.4.1.6.1. Update manager - Assign projects after mapping automatically processed before
5.8.4.1.6.1.1. Assign project.prj (Standard name adjusted)
5.8.4.1.6.1.2. Assign project2.prj (Adjusted directory)
5.8.4.1.6.1.3. Assign project4.prj (directory relocated and Standard name adjusted)
5.8.4.1.6.2. Update manager - Assign projects without preceding mapping
5.8.4.1.6.2.1. Assign project3.prj (project and Standard number renamed)
5.8.4.1.6.2.2. Assign project5.prj (project and Standard number renamed and Standard name adjusted)
5.8.4.1.6.2.3. Assign project6.prj and project7.prj
5.8.4.1.6.3. Final check
5.8.4.2. Catalog update - Example 2
5.8.4.2.1. Preparation
5.8.4.2.2. Status after update installation to Bikecompany V2 and before editing with Update Manager
5.8.4.2.3. Editing in Update manager
5.8.4.3. Install update version
5.8.4.3.1. Update without connection to the LinkDB
5.8.4.3.2. Correct version numbers
5.8.4.3.3. Update structure table
5.8.4.4. User interface of Update Manager
5.8.4.4.1. Symbols in the Catalogs section
5.8.4.4.2. Symbols in the Line mapping section
5.8.4.5. Functions
5.8.4.5.1. Active State and Requested State
5.8.4.5.2. Changed standard name
5.8.4.5.3. Moved dataset
5.8.4.5.4. No correlation to the old dataset found
5.8.4.5.5. Conduct assignments across lines
5.8.4.6. Background information
5.8.5. PARTadmin - Index administration
5.8.6. PARTadmin - Catalog update
5.8.7. Creation of ERP numbers
5.8.7.1. Using PARTdataManager
5.8.7.1.1. Without direct linkage to the ERP system
5.8.7.1.1.1. Manually enter ERP number
5.8.7.1.1.2. Automatically generated timestamp number
5.8.7.1.1.3. ERP Number Generator
5.8.7.1.1.3.1. Prerequisites
5.8.7.1.1.3.1.1. SQL commands for applying the "Sequencer" table in the LinkDB
5.8.7.1.1.3.1.2. Activating ERP Number Generator
5.8.7.1.1.3.2. Incorporate ERP number into the PARTdataManager
5.8.7.1.1.3.3. Further number generations based on the example of the default setting
5.8.7.1.1.3.4. Adjust conditions for number generation
5.8.7.1.2. Applying ERP numbers with direct linkage to the SAP system
5.8.7.2. Using PARTlinkManager
5.8.7.2.1. Enter ERP number with PARTlinkManager
5.8.7.2.2. Import a project into LINKDB – Assign ERP number
5.8.7.3. PARTdataCenter
5.8.8. Edit variant / Create variant in PARTlinkManager
5.8.9. Create variants in PARTdataManager
5.8.10. Editing LinkDB in PARTlinkManager
5.8.10.1. Editing columns
5.8.10.2. Edit row
5.8.11. Delete datasets
5.8.12. Edit/delete dataset using PARTdataManager
5.8.13. Automated and cyclical update of data
5.9. Reference
5.9.1. PARTlinkManager reference
5.9.1.1. Launch
5.9.1.1.1. License selection dialog box at Floating licensing
5.9.1.2. Authorization rights
5.9.1.3. Menus
5.9.1.3.1. File
5.9.1.3.1.1. Connect
5.9.1.3.1.2. Connect as...
5.9.1.3.1.3. Switch role
5.9.1.3.1.4. Disconnect
5.9.1.3.1.5. Export as -> CSV table
5.9.1.3.1.6. Import
5.9.1.3.1.7. Execute Script
5.9.1.3.1.8. Exit
5.9.1.3.2. View
5.9.1.3.2.1. Show tree
5.9.1.3.2.2. Display filtered tree
5.9.1.3.2.3. Hide old versions of parts
5.9.1.3.3. Extras
5.9.1.3.3.1. Database
5.9.1.3.3.1.1. Adding/removing database columns
5.9.1.3.3.1.1.1. Adding database column
5.9.1.3.3.1.1.2. Removing database column
5.9.1.3.3.1.2. Show database columns
5.9.1.3.3.1.3. Save/restore database
5.9.1.3.3.1.4. Editing additional tables in the PARTlinkManager
5.9.1.3.3.2. Configure ERP environment
5.9.1.3.3.2.1. Register PARTlinkManager preferences
5.9.1.3.3.2.1.1. Set row color
5.9.1.3.3.2.1.2. Group definitions / Set column color
5.9.1.3.3.2.1.3. Adjust table values
5.9.1.3.3.2.1.4. Modify column display
5.9.1.3.3.2.1.5. Column position in PARTlinkManager
5.9.1.3.3.2.2. PARTdataManager preferences tabbed page
5.9.1.3.3.2.2.1. Login mode
5.9.1.3.3.2.2.2. e-mail notification
5.9.1.3.3.2.3. Database tab
5.9.1.3.3.2.4. Export tables tab
5.9.1.3.3.2.5. Translations tab
5.9.1.3.3.2.6. Standard name tab, Standard name (short) tab , BOM name tab
5.9.1.3.3.2.6.1. Naming rules for CAD file names
5.9.1.3.3.3. Preferences
5.9.1.3.3.3.1. PARTlinkManager - Search fields
5.9.1.3.3.3.2. Network
5.9.1.3.3.3.3. Logging settings
5.9.1.3.3.4. Catalog update - Update manager
5.9.1.3.3.5. PARTadmin
5.9.1.3.4. ? (Hilfe)
5.9.1.4. Menu buttons
5.9.1.5. Buttons
5.9.1.6. Context menu
5.9.1.6.1. Set fields
5.9.1.6.2. Duplicate
5.9.1.6.3. Edit variant
5.9.1.6.4. Create variant
5.9.1.6.5. Assign ERP numbers / delete
5.9.1.6.6. Import project into database
5.9.1.6.7. Edit project table
5.9.1.6.7.1. Change standard descriptions according to project
5.9.1.6.7.2. Line sorting in PARTdataManager up to V9.04
5.9.1.6.7.3. Line sorting in PARTdataManager as of V9.05
5.9.1.6.7.4. Column sorting of geometry columns in PARTdataManager
5.9.1.6.7.5. Update structure table
5.9.1.7. Filtering display
5.9.2. PARTadmin Reference
5.9.2.1. Menus
5.9.2.1.1. File
5.9.2.1.2. ? (Hilfe)
5.9.2.2. Icons
5.9.2.3. ERP environment settings
5.9.2.3.1. Idle time - Connect LinkDB
5.9.2.3.2. Try NT user authentication
5.9.2.3.3. Enable automatic login
5.9.2.3.4. Define Database interface
5.9.2.4. "Roles" dialog - Buttons
5.9.2.5. "Roles" dialog - Tabbed pages
5.9.2.5.1. Tabbed page "General"
5.9.2.5.2. Tabbed page "General" - Examples
5.9.2.5.3. Tabbed page "PDM"
5.9.2.5.4. Tabbed page "Display"
5.9.2.5.4.1. Status colors for catalog index
5.9.2.5.4.2. Status indicating bitmaps for table view (Status light)
5.9.2.5.4.2.1. Syntax example of a complex condition
5.9.2.5.5. Tabbed page "Menu"
5.9.2.5.5.1. Classify project
5.9.2.5.6. Tabbed page "Mail"
5.9.2.5.6.1. General notes
5.9.2.5.6.2. e-mail notification using PARTadmin
5.9.2.5.6.3. e-mail notification using PARTlinkManager
5.9.2.5.6.4. e-mail notification using enhanced ERP-functionality
5.9.2.5.7. Tabbed page "Translations"
5.9.2.5.8. Tabbed pages "Standard name", "Standard name (short)" and "BOM name"
5.9.2.6. Adding a key / expanding USERDIALOG - Example
6. FAQ
6.1. Help
6.2. Context help...
6.3. Training documents
6.4. About
6.5. Licenses
6.5.1. License information
6.5.1.1. "General" tabbed page
6.5.1.2. "License selection" tabbed page
6.5.1.3. "Expiring licenses" tabbed page
6.5.1.4. "Active licenses" tabbed page
6.5.1.5. "Checkout" tabbed page
6.5.2. Licensing
6.5.2.1. "Request licenses online" index page for single workstation license
6.5.2.2. "Request licenses online" index page with FLM license
6.5.2.3. Entering licenses... (Single workstation)
6.5.2.4. Entering licenses... (FLM)
6.5.2.5. Check licenses... (Single workstation)
6.5.2.6. Check licenses... (FLM)
6.5.2.7. No valid license available
6.6. System info/Support
6.7. PARTconcept: Ticketing
6.8. Remote maintenance
6.9. Global Logging System
6.10. Adjust GUI - Overview
7. Appendix
7.1. Constants, Functions, Operators, mathematical expressions
7.1.1. Fortran / SQL Syntax
7.1.2. Constants
7.1.3. Operators
7.1.4. Functions
7.1.5. Examples
7.1.5.1. Example 1
7.1.5.2. Example 2
7.1.5.3. Example 3
7.1.5.4. Example 4
7.2. Third Party License Information
Index