powered by CADENAS

Manual

Manual

5.4.10.  Active measurement

Adjust the length of parts directly with a 3D model.

Do the following:

  1. Select the part to be changed.

  2. Click on Active measurement.

    --> The entry field for the desired measurement is visible.

  3. Choose:

    • two parallel faces or

    • two points or

    • two parallel edges

  4. Enter the desired measurement between the two points.

Distance 230 selected

Distance 230 selected

Two parallel faces selected

Two parallel faces selected

The selected profile was adjusted to a length of 230

The selected profile was adjusted to a length of 230