powered by CADENAS

Manual

Manual

5.3.1.  Insert starter part

Start with Create new configuration.

Under Parts -> Add choose a part type.

The following choices are available:

Profiles

Transport systems

Security systems

Pipeline systems

Further objects

Lego

[Note] Note

The part types shown can be customized.

The following descriptions are carried out on profiles and are considered equal for the other part types.

In the Details dialog area the parts available in each condition are listed in a directory tree.

Choose the desired part and confirm by double-clicking or pressing OK.

For the starter part you can determine the origin as well:

  1. If desired, modify the absolute position, the axis and the rotation angle.

  2. Accept default values.

Selection in directory tree

Selection in directory tree

Determine position of starter part

Determine position of starter part

Confirm with OK.

--> The part is inserted.

Details: part 1 inserted

Details: part 1 inserted

3D: part 1 inserted

3D: part 1 inserted

The connection points to other parts in the 3D area are marked in the form of green pyramid symbols. The connection points are also listen under Details. In addition you can find part information about the currently marked part under Details.