powered by CADENAS

Manual

Manual

2.6.2.3. "On surface"

Click on the button On surface .

The placement happens orthogonally to the touched point on the planar surface. All required connections are automatically created.

Select a point on a planar surface

This placement method suits for bolts for example.

Example: Insertion point on planar surface determined

Example: Insertion point on planar surface determined

Click on Place.

-> The bolt is placed on the plane.

Bolt placed on plane

Bolt placed on plane

When the first placement is finished, you can insert the part again via click on Place.

With Close the PARTsolutions placement dialog is closed.