English
Deutsch
Español
Français
Hrvatski
Italiano
Polski
Türkçe
Русский
中文
日本語
한국어
Legal notice
powered by CADENAS

Manual

Top Links

Manual

2.3. CAD-spezifische Informationen
2.3.2. CATIA V5
Zurück   Weiter

2.3.2. CATIA V5

2.3.2.1. Block [INTERFACE]
2.3.2.1.1. Key "insertComponentFlexible" (FLEXIBLE_RIGID_SUBASSEMBLY)
2.3.2.1.2. Key "DEBUG"
2.3.2.1.3. Key "NativeCheckoutTargetFolder"
2.3.2.2. Block [CreationOptions]
2.3.2.2.1. Key "FileName(is3dPart)"
2.3.2.2.2. Key "FileName(is3dAsm)"
2.3.2.2.3. Key "TemplateName(is3dPart)"
2.3.2.2.4. Key "TemplateName(is3dAsm)"
2.3.2.2.5. Key "poolPath"
2.3.2.2.6. Key "MaterialFile"
2.3.2.2.7. Key "Material"
2.3.2.2.8. Key "APPLY_PART_MATERIAL_TO"
2.3.2.2.9. Key "CREATE_THREADS"
2.3.2.2.10. Key "COLOR_FEATURES_00"
2.3.2.2.11. Key "SimplifyAssemblies"
2.3.2.2.12. Key "SKIP_ERRORS"
2.3.2.2.13. Key "CREATE_COMPONENTS"
2.3.2.2.14. Key "CREATE_SOLIDS"
2.3.2.2.15. Key "LOAD_CGR"
2.3.2.2.16. Key "CREATE_PUBLICATIONS_IN_PART"
2.3.2.2.17. Key "CREATE_AUTO_CST_SKETCH"
2.3.2.2.18. Key "SAVE_DOCUMENT_TYPE"
2.3.2.2.19. Key "CREATE_CGR"
2.3.2.2.20. Key "UseAsmMates"
2.3.2.3. Block [AttributeMapping]
2.3.2.4. Block [CATPartParameters]
2.3.2.5. Block [CATCompProperties]
2.3.2.5.1. Key "CATPRODUCT_INSTANCENAME"
2.3.2.6. Block [CATProdProperties]
2.3.2.6.1. Key "CATPRODUCT_PARTNUMBER"
2.3.2.7. Commands to adjust behavior/visibility of PARTsolutions interface menu and workbenches
2.3.2.7.1. Block [INTERFACE] - Keys with "_SHOW" - Load function
2.3.2.7.1.1. Key "COMMAND_SHOW_PSOLPartDataManager"
2.3.2.7.1.2. Key "COMMAND_SHOW_PSOLPartcadAssistant"
2.3.2.7.1.3. Key "COMMAND_SHOW_PSOLPartConnect"
2.3.2.7.1.4. Key "COMMAND_SHOW_PSOLList"
2.3.2.7.1.5. Key "COMMAND_SHOW_PSOLReplace"
2.3.2.7.1.6. Key "COMMAND_SHOW_PSOLRealign"
2.3.2.7.1.7. Key "COMMAND_SHOW_PSOLSetup"
2.3.2.7.1.8. Key "COMMAND_SHOW_PSOLSubtract"
2.3.2.7.1.9. Key "COMMAND_SHOW_PSOLSubtractBodies"
2.3.2.7.1.10. Key "COMMAND_SHOW_PSOLSubtractParts"
2.3.2.7.1.11. Key "COMMAND_SHOW_PSOLDelHoles"
2.3.2.7.1.12. Key "COMMAND_SHOW_PSOLCheckErrors"
2.3.2.7.1.13. Key "COMMAND_SHOW_PSOLPartLoader"
2.3.2.7.1.14. Key "COMMAND_SHOW_PSOLNCScan"
2.3.2.7.1.15. Key "COMMAND_SHOW_PSOLPDPartDataManager"
2.3.2.7.1.16. Key "COMMAND_SHOW_PSOLPDPartcadAssistant"
2.3.2.7.1.17. Key "COMMAND_SHOW_PSOLPDSubtractBodies"
2.3.2.7.1.18. Key "COMMAND_SHOW_PSOLPDRealign"
2.3.2.7.1.19. Key "COMMAND_SHOW_PSOLPDNCScan"
2.3.2.7.1.20. Key "COMMAND_SHOW_PSOLPDSetup"
2.3.2.7.1.21. Key "COMMAND_SHOW_PSOLDRWPartConnect"
2.3.2.7.1.22. Key "COMMAND_SHOW_PSOLDRWPartDataManager"
2.3.2.7.1.23. Key "COMMAND_SHOW_PSOLDRWPartLoader"
2.3.2.7.1.24. Key "COMMAND_SHOW_PSOLDRWSetup"

In the configuration file ifcatia.cfg (ifcatia_start.cfg) you can find all settings for the CATIA V5 integration.

The most important information is found in the single blocks and keys, in the configuration file itself.

In the following you can find more comprehensive information on some blocks and keys.

Syntax und essential concepts are found under Abschnitt 2.2, „CAD-übergreifende Informationen“.

[Hinweis] Hinweis

Changes at configuration files should only be performed by experienced users or CADENAS Consultants.

Zurück  Nach oben  Weiter
2.3.1.7. Anwender Dokumentation  Zum Anfang  2.3.2.1. Block [INTERFACE]