English
Deutsch
Español
Français
Hrvatski
Italiano
Polski
Türkçe
Русский
中文
日本語
한국어
Legal notice
powered by CADENAS

Manual

Top Links

Manual

10.5.4.3. Function buttons
10.5.4.3.2. Point
Prev   Next
10.5.4.3.2. Point
10.5.4.3.2.1. Connection points for assembly construction
10.5.4.3.2.1.1. General connection points
10.5.4.3.2.1.2. Name conventions for Connection points and Insertion lines
10.5.4.3.2.1.3. Direction of connection points
10.5.4.3.2.1.4. Connection points at miters
10.5.4.3.2.1.5. Connection points at connection elements
10.5.4.3.2.1.6. Create Connection line
10.5.4.3.2.2. Create pattern
10.5.4.3.2.2.1. Create pattern with same alignment
10.5.4.3.2.2.2. Create rotated pattern
10.5.4.3.2.2.2.1. Create pattern with circular orientation
10.5.4.3.2.2.2.2. Angular borings
10.5.4.3.2.2.2.3. Arrange borings to points of reference
10.5.4.3.2.2.2.4. Move point of reference of rotated pattern
10.5.4.3.2.2.3. Irregular patterns
10.5.4.3.2.3. Sweep
10.5.4.3.2.4. Connection points as Published elements for automatic placement in the CAD

Insert point :

The completely positioned point is identified in the sketch by a square frame.

Insert connection point :

The completely positioned connection point is indicated in the sketch by a green triangle .

More details can be found under:

Pattern origin :

The finally positioned pattern origin is now identified by a yellow circle in the sketch. See Section 10.5.4.3.2.2, “ Create pattern ”.

Reference point for rotated pattern :

The finally positioned reference point is now identified by a yellow square in the sketch. See Section 10.5.4.3.2.2, “ Create pattern ”.

[Note] Note

Confirm inputs in the Change parameter window with OK.

Prev  Up  Next
10.5.4.3.1. Basics for use  Home  10.5.4.3.2.1. Connection points for assembly construction