powered by CADENAS

Manual

Manual

10.5.1.2.8.  Pan (assembly)

Depending on the settings made here, the design object will be moved accordingly in "space".

  • in X direction...

  • in Y direction...

  • in Z direction...

Example: in X direction...

In the Move part window, enter the desired Offset (movement) and confirm with OK.

The part is moved around 10 on the x-axis

The part is moved around 10 on the x-axis

-> In 3D view a new plane has been drawn in.

-> This movement plane - the AutoOffsetPlane - also shows up in the History.