Manual

Login

Our 3D CAD supplier models have been moved to 3Dfindit.com, the new visual search engine for 3D CAD, CAE & BIM models.

You can log in there with your existing account of this site.

The content remains free of charge.

Manual

6.8. Variable Manager docking window 6.8.4. Designer mode \| Table mode \| Dual mode
Prev	Next

6.8.4. Designer mode | Table mode | Dual mode

6.8.4.1. Unknown variable (Error message)
6.8.4.2. Using mathematical function in Sketch or Attribute algorithm?

	Note
You have already modelled parts in earlier versions of eCATALOGsolutions? Then you will recognize fundamental innovations at a glance. In V11 you won't find the module PARTeditor anymore. It has been completely integrated in the module PARTdesigner. All PARTeditor functions are available in PARTdesigner now, so that annoying switching between different working areas is unneccessary. Comfortable working with docking windows, which can be adjusted in size and position, is already known from PARTdataManager. Now this functionality is also available in PARTdesigner. Even if you are working in one single user interface - which is more comfortable - be aware of the following facts: A parametrical 3D model is created. These data are saved in the fiile type 3db further on. And a characteristic attribute table is created, which "fills" the parametrical 3D model. The table data is saved in the file type tab or tac further on. In the Variable Manager there is a list field Mode with the following options: Designer mode -> Data storage in 3db file Table mode -> Data storage in tab/tac file Dual mode -> Data storage both in 3db file and in tab/tac file Depending on the chosen mode, when clicking on Commit, the data is saved in the corresponding file type or in both. When designing a model there are two general options: First create the model [Designer mode] (with fixed values or with a single "prototype" table row) or first create the characteristic attribute table [Table mode]. Both methods have their specific advantages and disadvantages: First create model: In Designer mode you can create a simple 3D object (without further specification options and without the possibility to create attribute algorithms or value ranges. So it may be appropritate for simple parts or for demo purposes. A small example on this can be found under Section 6.4, “Create 3D model: Small example from A to Z ”. The training example "Cap nut" can also be retraced completely in the Designer mode. See Section 3.2, “Example: Creating a cap nut ”. First create table: When creating complex parts normally this approach is preferred. In Table mode you have the option to create Value range variables and Attribute algorithms. A small example on this can be found under Section 6.5, “Create table: Small example from A to Z ”. Depending on use case you can use mathematical functions in the sketch (saving in the 3db file) or in attribute algorithms (saving in the tab/tac file). Explanations on this can be found under Section 6.8.4.2, “Using mathematical function in Sketch or Attribute algorithm?”. Please regard possible differences in syntax. See Section 15.1, “PARTdesigner-Expressions ” und Section 6.8.5.1, “Mathematical functions (Attribute algorithm) ”.

Note

You have already modelled parts in earlier versions of eCATALOGsolutions? Then you will recognize fundamental innovations at a glance. In V11 you won't find the module PARTeditor anymore. It has been completely integrated in the module PARTdesigner.

All PARTeditor functions are available in PARTdesigner now, so that annoying switching between different working areas is unneccessary. Comfortable working with docking windows, which can be adjusted in size and position, is already known from PARTdataManager. Now this functionality is also available in PARTdesigner.

Even if you are working in one single user interface - which is more comfortable - be aware of the following facts:

A parametrical 3D model is created. These data are saved in the fiile type 3db further on.

And a characteristic attribute table is created, which "fills" the parametrical 3D model. The table data is saved in the file type tab or tac further on.
In the Variable Manager there is a list field Mode with the following options:
- Designer mode -> Data storage in 3db file
- Table mode -> Data storage in tab/tac file
- Dual mode -> Data storage both in 3db file and in tab/tac file
Depending on the chosen mode, when clicking on Commit, the data is saved in the corresponding file type or in both.
When designing a model there are two general options: First create the model [Designer mode] (with fixed values or with a single "prototype" table row) or first create the characteristic attribute table [Table mode].

Both methods have their specific advantages and disadvantages:
- First create model:
  
  In Designer mode you can create a simple 3D object (without further specification options and without the possibility to create attribute algorithms or value ranges. So it may be appropritate for simple parts or for demo purposes.
  
  A small example on this can be found under Section 6.4, “Create 3D model: Small example from A to Z ”.
  
  The training example "Cap nut" can also be retraced completely in the Designer mode. See Section 3.2, “Example: Creating a cap nut ”.
- First create table:
  
  When creating complex parts normally this approach is preferred. In Table mode you have the option to create Value range variables and Attribute algorithms.
  
  A small example on this can be found under Section 6.5, “Create table: Small example from A to Z ”.
Depending on use case you can use mathematical functions in the sketch (saving in the 3db file) or in attribute algorithms (saving in the tab/tac file).

Explanations on this can be found under Section 6.8.4.2, “Using mathematical function in Sketch or Attribute algorithm?”.

Please regard possible differences in syntax. See Section 15.1, “PARTdesigner-Expressions ” und Section 6.8.5.1, “Mathematical functions (Attribute algorithm) ”.

Prev	Up	Next
6.8.3. Variable Manager - The individual parameters	Home	6.8.4.1. Unknown variable (Error message)

Manual

Login

Top Links

Manual

6.8.4. Designer mode | Table mode | Dual mode