powered by CADENAS

Manual

Manual

6.12.3.  New Drawing

To create drawings, please use the command New Drawing.

-> The Sketcher is opened in Drawing mode.

Drawing

Drawing

Here, the commands Accept changes and Reject changes are inactive.

You can save drawings in the following formats:

  • Sketch template (*.hsk)

  • 2D drawings (*.2db)

  • Designer 2D (V3.0) (.dbs)

Furthermore you can import drawings in the following formats:

  • Sketch template (*.hsk and *.skt)

  • PARTdesigner 2D 2.0 (*.dbs)

  • DXF file (*.dxf)

Detailed information on this can be found under Section 6.9.3.12, “File management ”.