powered by CADENAS

Manual

Manual

7.6.2.8.  Pan (part)

[Note] Note

When using Pan, dependencies are possibly created, so may be there is no simple "Undo". Please regard the dependencies when deleting automatically created planes.

Depending on the settings made here, the design object will be moved accordingly in "space".

  • in X direction...

  • in Y direction...

  • in Z direction...

Example: in X direction...

In the Move part window, enter the desired Offset and confirm with OK.

-> In the 3D view, a new plane has been drawn in.

-> This offset plane - the AutoOffsetPlane - also shows up in in the 3D History.

The part is moved around 10 on the x-axis

The part is moved around 10 on the x-axis